Table of Contents
Advertisement
8.2.3
Image menu
8.2.3.1
When IR is selected
10342903;a1
Figure 8.1 Image menu when IR is selected
The Image menu is used to define appearance of the system video display. The
up/down arrow buttons are used to move between the different menu features;
pressing the ENTER button will activate the currently highlighted feature, and then
exit the MENU mode. To exit the Image menu without making any changes, press
the C (cancel) button.
8.2.3.1.1
Declutter
The Declutter feature allows the operator to temporarily remove all of the displayed
symbology from the system display. The symbology will return the next time the ENTER
button is pressed.
8.2.3.1.2
Invert palette
Highlighting and pressing enter inverts the palette currently in use, and then exits the
MENU mode.
Gray (white hot) to Inv gray (black hot), or back;
■
Rainbow to Inv rainbow, or back;
■
Iron to Inv Iron, or back.
■
8.2.3.1.3
Change palette
Highlighting and pressing ENTER changes the palette currently in use, and then exits
the MENU mode. The palettes will 'rotate' from Gray to Rainbow to Iron, and then
back to Gray and start over again. If the palette currently in use is inverted, the newly
selected palette will also be inverted.
8.2.3.1.4
Freeze/Live
Changes the display from live image to frozen image, or back. A frozen image is
identified by the text Frozen in the display.
Publ. No. 1 557 544 Rev. a121 – ENGLISH (EN) – October 6, 2005
8.2 – On-screen menus
17
Advertisement
Table of Contents
