Error Messages - Kyocera ECOSYS FS-1020MFP Service Manual

1-4-6 Error Messages

3 in 1 25/26 ppm model, 4 in 1 20/21, 25/26 ppm model
Message Display
Add paper.
Add toner.
Call service.
Cannot combine
pages.
Cannot connect.
Close the cover.
Error.Power off.
FAX memory is full. Memory full
Incorrect code.
Message Dis-
played in KYOC-
ERA client tool, and
the Status Monitor
Add paper
Add toner
Error has occurred
-
-
Cover open
Error has occurred
-
Meaning
A paper jam has occurred.
There is no paper in the
paper source.
The toner is running out.
An error has occurred in the
machine.
The machine cannot run this
program due to unusable
original size is registered in
the program.
The USB cable is not con-
nected.
Cannot find KYOCERA Cli-
ent Tool or the appropriate
printer driver.
The rear cover or front cover
is open.
Internal error has occurred.
Memory full Fax transmis-
sion is not possible due to
insufficient memory.
Fax reception is not possible
due to insufficient memory.
The entered Administrator ID
is not correct.
1-4-22
2M4/2M5/2M6/2M7-1
Remedy
When the jammed paper is
removed and the rear cover is
closed, the machine reverts to
normal operation and resumes
printing (see page 1-4-1).
Load paper into the paper
source.
Have a new toner container
ready.
Make a note of the error code
displayed on the message dis-
play, and contact your service
representative.
Change the program settings.
Connect the USB cable.
Open KYOCERA Client Tool or
install the appropriate printer
driver.
Close the rear cover or front
cover.
Turn the main power switch
OFF and then ON.
Press [OK] key and the job will
be canceled.
Press [OK] key to clear the
error.Only the received pages
are printed and then the
machine tries to receive the
remaining pages.
Enter the correct Administrator
ID.