Kyocera ECOSYS FS-1020MFP Service Manual page 74

Maintenance
menu
Adjust scan Scanning start
position position
Scan margins
Factory Default Restore Default
Items
Type or select the start position for the platen, from -10 to +1
mm. Type or select the start position for the document pro-
cessor, from -3 to +10 mm.
Each unit of change moves the position by 0.1mm.
Adjusts the position of the
scanned image.
Type or select the scan margins of all edges for the platen
and document processor, from 0 to 10 mm.
A higher setting makes the margin wider.
A lower setting makes the margin narrower.
Scan margins Adjusts the
width of the top edge, bottom
edge, left edge and right
edge margins.
This feature restores the device to the factory default set-
tings.
Description
1-3-22
2M4/2M5/2M6/2M7
Platen Top:-10, Left:0
Top edge
Bottom edge
Top:10, Bottom:0,
Left:0,Right:0