Service Mode; Executing A Service Mode - Kyocera ECOSYS FS-1020MFP Service Manual

1-3 Service Mode

1-3-1 Service mode
The machine is equipped with a maintenance function which can be used to maintain and service the
machine.
* : 3 in 1 25/26 ppm model, 4 in 1 20/21, 25/26 ppm model

(1) Executing a Service mode

Start
Press the Menu key.
Select [System Menu] using the cursor
up/down keys and press the OK key.
Select [Adjust / Maint.] using the cursor
up/down keys and press the OK key.
Use the numeric keys to enter
the Administrator ID (4 digits)
and press OK key.
Select [Service Setting] using the cursor
up/down keys and press the OK key.
The selected service mode is run.
Press the Stop / Reset key.
End
The System Menu appears.
The Adjust/Maint. menu appears.
Administrator ID entry display appears.
Note
The default setting is 2500 for the
25/26 ppm model, 2000 for the 20/21 ppm model.
The Service Setting menu appears.
Figure 1-3-1
1-3-1
2M4/2M5/2M6/2M7