Kyocera ECOSYS FS-1020MFP Service Manual page 48

Installing the toner
1. Press the power switch to On.
2. Starting the toner Installation.
*: The installation is completed when the
operation panel shows the following, after
approximately 7 minutes.
Make test printing
3 in 1 25/26 ppm model,4 in 1 20/21,25/26 ppm model
1. Draw out the sub tray and lift the paper
stopper upright.
2. Use the cursor key to select the lan-
guage and press OK.
3 in1 25/26 ppm model
4 in1 20/21,25/26 ppm model
Language
:*English
1
Sub tray
Paper stopper
1-2-18
2M4/2M5/2M6/2M7
3 in1 20/21 ppm model
Figure 1-2-32
2
Figure 1-2-33