Paper Misfeed Detection Condition - Kyocera ECOSYS FS-1020MFP Service Manual

(2) Paper misfeed detection condition

20/21 ppm model
RS
DPOS
DPTS
Code
0101 Waiting for process package
to become ready
0105 Prevention of the runaway
motor
0106 Waiting for duplex print
request
0107 Waiting for fuser package to
become ready
0111 Rear cover open
0120 Controller sequence error
(Duplex print is requested
when duplex pages are not
present)
*: Refer to figure 1-4-1 for paper misfeed indication (see page 1-4-1).
DP
Figure 1-4-2 Paper jam location
Contents
The process package does not return Ready in
185 seconds after a print request has been
accepted.
The process and fuser packages do not return
Ready in 185 seconds after a print request has
been accepted.
The regist sensor won't be detected of its on and
off for 480 s during the main motor is driven.
Paper feeding request for duplex printing given by
the controller is unreachable.
The fuser package does not return Ready in 185
seconds after a print request has been accepted.
Cover is opened during printing.
Controller issued a request for duplex feeding
while the pages for duplex print is not present in
the duplex unit.
25/26 ppm model
DUS
RS
Conditions
1-4-2
2M4/2M5/2M6/2M7-1
Jam
location*
-
-
-
-
-
-