Kyocera ECOSYS FS-1020MFP Service Manual page 60

items
No.
(27) Status
(28) Printer Host Name
(29) IPv4
(30) DHCPv4 Status
(31) IP Address
(32) Subnet Mask
(33) Default Gateway
(34) Copy
(35) Density
(36) Original quality
(37) Sort
(38) EcoPrint
(39) FAX Settings
(40) Density
(41) Local FAX Name
(42) Local FAX Number
(43) Fax Dialing Mode
(44) Rings
(45) Counters
(46) Printed Pages
(47) Scanned Pages
(48) Print coverage
(49) Toner Gauge
(50) Print Density
(51) Main-Charger correction value
(52) High-Altitude mode
Description
1-3-8
Description
Supplement
Enabled / Disabled
"KM"+Lower 6 figure of a MAC Address
-
Enabled / Disabled
IP address / Not Defined
Subnet Mask / Not Defined
Default Gateway / Not Defined
-3,-2,-1,0,1,2,3
Text,Text+Phot,Phot,Text+Phot(High)
Enabled / Disabled
Enabled / Disabled
4 in 1 model only
-3,-2,-1,0,1,2,3
Max. 32 characters
Max. 20 figures
Pattern 1(DTMF,10PPS),
Pattern 2(DTMF,10PPS,20PPS)
1-15
-
0-9999999
0-9999999
0 to 100%
0 to 100%
In the state of Low Toner, it always displays as 5%
of residual quantity.
* : Moreover, the following texts are indicated
when the toner container currently used is
judged not to be an original manufacturer's
product by IC Chip. And Toner Gauges
does not display.
WARNING
We recommend the use of our own brand supplies.
We will not be liable for any damage caused by the
use of third party supplies in this machine.
Default: 3(1 to 5)
Default: 4(1 to 7)
Default: 0(0 to 2)
2M4/2M5/2M6/2M7