7. Refitting the paper feed pulley
1.Insert the new paper feed pulley onto
the right side axle of the roller holder.
2.Turn the paper feed pulley.
3.Turn the paper feed pulley so that its
boss and the cutout on the right-side
roller holder mate with each other.
4.Slide the left-side roller holder.
* : Confirm that it is clicked in and locked.
8. Using the reverse procedure of
removing the lower feed guide, insert
the right side first, then the left side into
the machine. Insert bosses into the
holes on the main unit.
Right roller holder
3
2
1
Figure 2-4-20
Lower paper
feed guide
2
Figure 2-4-21
2-4-10
2M4/2M5/2M6/2M7
4
5
1