Basic Operations
Printing from a Computer Data
[Direct Print] [USB Job List]
This machine can directly print the original created on the computer by connecting the computer and machine by a cable.
The data will be digitally processed into a master, thus achieving higher quality prints than the master-making of
scanned originals.
Furthermore, a USB slot for connecting a USB Flash Drive is supplied with this machine so that you can print by con-
necting a USB Flash Drive that stores the data of originals to the machine even if the computer and machine are not
connected by a cable.
Note:
• First, install a proper printer driver on your computer. See the "RISO Printer Driver User's Guide" for installation
details.
• This manual provides only a summary of functions available when printing from a computer.
• See the "RISO Printer Driver User's Guide" for further details about sending data and other settings.
Printing Computer Data
The computer and printer must be connected by a cable.
Note:
• When "User Management" is set by the administrator, the users will be asked to identify themselves during operations.
p.53
1
Make sure the machine is ON.
Check the Control Panel.
Note:
• When the power is OFF, both the Display and
the
key are off. Turn the power ON.
p.38
• The machine automatically wakes up from
Energy Saving mode when data is sent from a
computer, and it starts processing the data.
54
Printing from a Computer Data [Direct Print] [USB Job List]
[Direct Print]
2
Check for printing paper.
Make sure the paper is loaded.
To load or to change the paper, see the following page.
After replacing with paper of a different size,
adjust the position of the Receiving Tray Paper
Guides and Paper Stopper.
Connect the USB Flash Drive
to the USB slot
p.38
p.40
USB Flash Drive