Specifying Stored Size - Riso ME 9450 User Manual

Specifying Stored Size

Specify the size to save the scanned original.
It is necessary to set the Format size when:
• you place the originals on the Glass Platen
• you set the custom-sized originals in the optional ADF unit
• you want to save at a size that differs from the size of the original
When the standard-sized original is set in the optional ADF unit, the original size is detected automatically. The orig-
inal is saved by original format.
1
Touch [Format] on the Scan Basic
Screen.
The Format Screen appears.
2
Touch the Format size button to be
set.
If you select [Auto], the same size as the original
will automatically be set.
Note:
• When Format is set to "Auto", you cannot select
"Auto" under the Size.
Storing Original Data and Use Method
3
Touch [OK].
The stored size is confirmed and the screen
returns to the Scan Basic Screen.
Converting Hard-copies into Stored Data (Scan Mode)
219