Scanning A Hard-Copy Original - Riso ME 9450 User Manual

Scanning a Hard-copy Original

1
Place the original.
Place the original on the Glass Platen or in the
optional ADF unit.
To place the original, see
2
Select a scan mode.
Touch [Scanning] on the Mode Selection Screen.
p.29
The Scan Basic Screen is displayed.
Note:
• After selecting the Scan mode and if the follow-
ing "Format" Screen is displayed, select the
page size (original size) and touch [OK].
3
Setting data information.
Sets the file name, directory and owner name.
p.217
p.42.
Converting Hard-copies into Stored Data (Scan Mode)
Storing Original Data and Use Method
4
Setting required functions.
Set the required functions for scanning the origi-
nal.
Note:
• You can check scanned data instantly by ena-
bling the "Preview" function. You can also use
this function to check data before saving.
p.109
• See p.214 for the functions that can be set.
Important!:
• Set "Format" when scanning custom-sized orig-
inals.
p.219
5
To specify the operation mode
You can specify the print color of the data you
retrieve for printing.
If a Print Drum (Cylinder) of a color differing from
the print color selected is present, a message is
displayed.
Important!:
• This procedure is necessary with originals for
Dual-Color printing.
• There is no need to set when scanning Mono-
Color originals.
1)
Touch [Color] on the Functions Screen.
The Color Screen appears.
215