Operating Procedures For Easy 2Color - Riso ME 9450 User Manual

Functions for Master-Making

Operating Procedures for Easy 2Color

1
Select a Print mode.
Select Dual-Color print.
Note:
• See p.29 for how to select a print mode.
2
Set the original and print paper.
Place the original on the Glass Platen or in the
optional ADF unit.
To place the original, see
Important!:
• When "Specified Area" is used, set the original
on the Glass Platen.
• When the original is set on the Glass Platen, do
not remove the original until a Dual-Color proof
copy has been printed (step 7).
3
Touch [Easy 2Color] on the Func-
tions Screen.
106
Dual-Color Printing with 1 Original [Easy 2Color]
p.42.
4
Touch the button of the separation
to use.
When [Color editor] is selected, the subsequent
operations differ. For details, see
Note:
• The part for which a master is being made is
displayed in the lower right section of the
screen at Print Drum (Cylinder) 1 (
Print Drum (Cylinder) 2 (
Touch [Sw.Color] to switch the color separa-
tions.
• To cancel the setting of "Easy 2Color", touch
[Cancel].
5
Touch [OK].
Easy 2Color is set and returns to the Functions
Screen.
6
Configure print functions.
Make various settings as needed.
Note:
• When "Preview" is set, after the separation is
completed, the machine stops once. You can
check if the original has been correctly sepa-
rated.
p.109
7
Press the
The scanning of original starts.
Afterwards, perform the same operation as the
master-making and printing process for normal
Dual-Color printing.
p.108.
) and
).
key.