Basic Screen Layout - Riso ME 9450 User Manual

Basic Screen Layout

The name and function of each area of all Basic Screens are described below. The display of the Basic Screen differs
depending on whether you are printing from a paper document or printing from a computer.
Note:
• For information on other screens and their functions or settings, refer to corresponding pages.
Printing from a Paper Document
1)
Message Area
Displays the printer status and operational instructions. If
functions such as Program ( p.147) or Ink Saving are
used to print, the program information and/or function
icons are displayed.
2)
Mode display area
Displays the current printing mode with an icon.
or :Mono-Color printing mode only by Print
Drum (Cylinder) 1 or Print Drum (Cylinder) 2
:Dual-Color printing mode
3)
Tab Area
Touch a tab to display its screen.
4)
Functions Area
Displays the main functions for master-making/printing
steps.
Each button shows the current setting.
Touch the relevant button to make the necessary
changes.
5)
Direct Access Area
Up to four buttons can be registered in advance. Use this
area to register the most frequently-used functions.
You can register them on the Admin. Screen.
p.202
1
2
3
4
5
6
6)
Status Area
Displays the current status of the machine.
/ : Color of the currently installed Print Drums
(Cylinders).
/ : Displays if the A4/Letter-R Drum (Cyl-
inder) is set to Print Drum (Cylinder) 1.
: Displays the status of data sent from a
computer.
Touch to display the list of data being received.
• [Idle]: Ready to receive data.
• [Data-Map]: Processing data for printing.
• [Pause]: Ready for output.
• [Error]: Error in data transmission.
• [Blocked]: Cannot receive data.
: Touch to display
ables information, Disposable Box Space, Print Drum
(Cylinder) information, date/time, My Counter).
p.240
Getting Acquainted
information (consum-
31
Display