Setting Data Information - Riso ME 9450 User Manual

Setting Data Information

Settings for the data to be scanned and stored are configured on the Scan Basic Screen.
The file name, directory and owner name are automatically allocated when scan mode is started, but you can change
this preset information if needed.
Note:
• Default settings for the "Directory" folder can be changed in "Admin.".
( p.194)
1
Enter a file name.
1)
Touch the file name input box.
The Rename Screen appears.
2)
Touch the
name.
Note:
• You can also press the
3)
Touch the text button and enter the file name.
p.157
4)
Touch [OK].
The file name is confirmed and the screen
returns to the Scan Basic Screen.
button to delete the current
key to delete.
Storing Original Data and Use Method
2
Specifying a Directory.
When saving in the USB Flash Drive, connect the
USB Flash Drive to the USB slot in advance.
Note:
• If the machine is equipped with the optional
RISO Controller IS300, you cannot specify
where to store the data.
1)
Touch the directory input box.
The Directory Screen appears.
2)
Touch [Storage Memory] or [USB Flash
Drive].
If the USB Flash Drive is not connected,
[USB Flash Drive] is grayed out and not
available.
Converting Hard-copies into Stored Data (Scan Mode)
217