Selecting Recognition And Identification System - Riso ME 9450 User Manual

Selecting Recognition and Identification System

Set the Recognition and Identification System using "Recognized by" in advance when setting up User Management.
Important!:
• If "Recognized by" is changed, all settings in User Management, including the administrator's registration, will be
cleared.
1
Touch [Admin.] on the Basic Screen
for each mode.
2
Touch [OK].
Skip to step 4 if the administrator is not registered.
If the administrator is already registered, the Rec-
ognition Screen is displayed here.
See step 3.
3
Identify the administrator.
When "Recognized by" is set to
"PIN Code"
Input the administrator's PIN Code.
When "Recognized by" is set to
"USB Flash Drive"
Connect the administrator's registered USB
Flash Drive to the USB slot.
Setting Up User Management [User Management]
Advanced Features
133