Margin
Leave a margin of at least 5 mm (
margin is critical in well-balanced Multi-Up positioning.
p.19
Note:
• A margin on the top edge will remain regardless of the enlargement or reduction settings.
3
5mm (
/
")
16
Set Position
(Top Side)
The Glass Platen
or the ADF unit (Optional)
Orientation of Print Paper
Always place paper in the Paper Feed Tray as shown below.
Multi-Up Interval
"Multi-Up" scans a number of sheets of the original.
The interval between the first scan and the second scan is called "Multi-Up Interval".
Replace originals or change settings for the second scan during the "Multi-Up Interval".
Note:
• Default "Multi-Up Interval" can be set on the Admin. Screen. The factory default is 15 seconds.
/
") on the top edge of the Glass Platen or the optional ADF unit. Allowing a proper
3
16
Paper feeding direction
Printing Multiple Originals on One Sheet [2 Up] [Multi-Up Print]
Functions for Master-Making
p.195
81