Printing At High Speed [High Speed]; Setting "High Speed - Riso ME 9450 User Manual

Printing at High Speed
By using "High Speed", you can print faster than you can by simply adjusting the "Print Speed".

Setting "High Speed"

Important!:
• When internal temperature of the machine is lower than 15°C (59°F), "High Speed" button is grayed out and cannot
be used. Use the normal print speed adjustment (1 to 5) until the internal temperature of the machine is higher than
15°C (59°F). The time it takes for the internal temperature to rise depends upon the machine environment.
• If Print Drum (Cylinder) 1 is removed and Mono-Color printing is performed with Drum (Cylinder) 2 at a print speed
of "High Speed", use paper of 364 mm (14
Touch [High Speed] on the Functions
Screen.
"High Speed" is set and the Print Speed indicator on the
control panel turns off.
Note:
• To slow down printing speed from "High Speed",
press the key on "Print Speed" adjustment
keys / indicator.
• By registering to the DirectAccess area, you can set
"High Speed" by a single touch during the printing
process.
p.202
[High Speed]
/ ") (B4) to 432 mm (17") (Ledger) in the vertical paper dimension.
11
32
Functions for Printing

Printing at High Speed [High Speed]

115