Replacing The Ink Cartridge - Riso ME 9450 User Manual

Replacing the Ink Cartridge

When the Ink is depleted, a message is displayed and the machine stops.
Replace with a new Ink Cartridge.
B
Caution:
• Ink may be left on the area around the Print Drum (Cylinder), so take care not to smudge your hands or clothes.
• Wash immediately with soap if you should get Ink on your hands, etc..
Important!:
• For the Ink Cartridge, it is recommended to use the products specified by RISO.
• Keep the power ON while replacing the Ink Cartridge.
• Replace with an Ink Cartridge of the same Ink color. If you want to change the Ink color, replace the Print Drum
(Cylinder) itself.
p.249
To replace the Ink Cartridge, the same procedure is used for both Print Drum (Cylinder) 1 and Print Drum (Cylinder) 2.
The explanation here is made in the case of Print Drum (Cylinder) 1.
1
Open the Front Cover.
2
Pull the empty Ink Cartridge out of
the holder.
Unlock
Turn the Ink Cartridge to the counter clockwise
( ) and then pull it out.
Important!:
• For collection or disposal of used Ink Car-
tridges, refer to the following page.
Note:
• Dispose the empty Ink Cartridge according to
the disposal rule of your local community.
3
Remove the cap on the new Ink Car-
tridge.
Turn the Ink Cartridge cap to remove.
Important!:
• Do not touch or give impact to the outlet surface
of the new Ink Cartridge.
Do not peel off the label beside the Ink Car-
tridge opening.
p.252
Replacing Consumables
Replacing the Ink Cartridge
245