Dual-Color Printing With [Stamp] - Riso ME 9450 User Manual

Storing Original Data and Use Method
Dual-Color Printing with
Pre-select Dual-Color Printing.
1
Place an original and load paper.
Place the original on Glass Platen or in the
optional ADF unit.
To place the original, see
2
Touch [Stamp] on the Functions
Screen.
Important!:
• If data for the "Stamp" is not registered, the
[Stamp] button is not displayed on the Func-
tions Screen.
3
Touch the button of the Stamp Data
to use.
Grayed out buttons are not available (no Stamp
Data has been registered).
4
Touch [OK].
Stamp is set.
234
Dual-Color Printing with the Original and Storage Data [Stamp]
[Stamp]
p.42
5
Set the print functions.
You can make adjustments to the print functions
as needed.
Note:
• When [Preview] is set, you can check if the ori-
entation of characters on the storage data and
hardcopy original correspond with each other.
p.109
6
Press the
A master is made from the hard-copy original and
the stamp data, and a proof printed.
For subsequent operations, follow the same pro-
cedure from step 13 ( p.44) of "Dual-Color Print-
ing with 2 Originals".
key.