Printing From Paper Documents; Dual-Color Printing With 2 Originals - Riso ME 9450 User Manual

Basic Operations

Printing from Paper Documents

Dual-Color Printing with 2 Originals

The operating procedure for Dual-Color Printing by scanning the original by color (for Print Drum (Cylinder) 1 and
Print Drum (Cylinder) 2) is explained here.
Important!:
Use paper that is 182 mm × 257 mm (7
Note:
To do Dual-Color Printing with one original by separating it into 2 colors, see
1
Make sure the machine is ON.
Check the Control Panel.
Note:
• When the power is OFF, both the Display and
the key are off. Turn the power ON.
p.38
• If the key is lit, the machine is in Energy
Saving mode. Press the
Energy Saving mode.
2
Check for printing paper.
Make sure the paper is loaded.
To load or to change the paper, see the following page:
p.38
After replacing with paper of a different size,
adjust the position of the Receiving Tray Paper
Guides and Paper Stopper.
p.40
3
Check the Display.
When the Recognition Screen is
displayed.
Follow the message on the screen.
For details, see
The initial screen will be displayed after the
user has been identified.
44
Printing from Paper Documents
Original for
Print Drum
(Cylinder) 1
Original for
Print Drum
(Cylinder) 2
" × 10
/ / ") (B5) or larger.
5 1
32 8
key to exit the
p.53.
Print Result
p.99.
When the initial screen is displayed
Proceed to step 4.
The initial screen differs depending on the set-
ting of "Display Priority" of "Admin.".
4
Touch [Dual-Color] on the Mode
Screen.
Note:
• If a Basic Screen other than the Dual-Color
Printing Screen is showing, press the
to display the Mode Screen.
• If /
button, the A4/Letter-R Drum (Cylinder) is set.
is displayed next to the
key