Replacing Consumables; Check For Remaining Amount Of Consumables - Riso ME 9450 User Manual

Replacing Consumables

Check for Remaining Amount of
Consumables
The machine checks and reports on remaining amount of Ink, master, paper, as well as the space left in the disposal box.
Note:
• The report may not be displayed if detection fails.
• The reported amount is for reference only and may not be perfectly accurate.
• If the Ink or master is depleted or the Master Disposal Box is full, a warning message is displayed and the machine stops.
1
Touch [i Info] on the Basic Screen.
2
Check for remaining amount of con-
sumables.
When running low, be sure to restock supply.
• Master ( p.242)
• Ink ( p.245)
240

Check for Remaining Amount of Consumables

(Unknown),
---,
no display
XXXX
• Master Disposal (used master) ( p.247)
Display Details
Indicator/Message
The black bar indicates
the remaining amount.
Ex:
approximately 10% left
Indicates that consumable
data is not available, is not
set, etc.
About the "My Counter" Screen
When the "Management Level" in the User Manage-
ment is set to "High/Full Management", touch [My
Counter] to display "My Counter" Screen.
On the "My Counter" Screen, you can confirm the
current user's Limit C/C, M/C and Present C/C, M/C.
Limit C/C and M/C are set by the administrator. Con-
sult your administrator for details.
My Counter
U-1(G-1)
Limit C/C
Present C/C
Limit M/C
Present M/C
Description
Close