Adjusting The Print Density [Print Density Adjustment] - Riso ME 9450 User Manual

Functions for Printing
Adjusting the Print Density
[Print Density Adjustment]
You can select the print density from five levels by each Print Drum (Cylinder).
You can adjust the print density while printing is in progress.
Important!:
• "Print Density" is not available when [Ink Saving] is selected.
p.76
Note:
• The default print density can be set on the Admin. Screen.
The factory default is set at level 3 (Standard).
p.193
Press the
print density.
1)
Adjusting the print density used for Print Drum
(Cylinder) 1
2)
Adjusting the print density used for Print Drum
(Cylinder) 2
3)
Print Density Adjustment Indicator
Shows the current setting of the print density.
4)
Key
Increases the print density incrementally.
5)
Key
Decreases the print density incrementally.
116

Adjusting the Print Density [Print Density Adjustment]

or key to adjust the
1 2
5
3
4