Registering A Stamp Data To Insert - Riso ME 9450 User Manual

Registering a Stamp Data to insert

For "Stamp", the data registered in the data for "Stamp" is used.
Store the original to be used for the Stamp in "Storage Memory" in advance, and register the data to be used for the
Stamp from the stored data.
Up to 10 data can be registered as Stamp Data.
See p.214 for information on creating storage data.
1
Touch [Admin.] on the Basic Screen
for each mode.
2
Touch [OK].
3
Touch [Stamp Data] on the Admin.
Screen.
See
Screen.
The Stamp Data Screen appears.
4
Touch an unused button.
Unused buttons are displayed with a solid line.
Used buttons are grayed out and are not availa-
ble.
The Storage Selection Screen is displayed.
Dual-Color Printing with the Original and Storage Data [Stamp]
Storing Original Data and Use Method
p.192 for operational details of the Admin.
229