NetComm 3G10WVR User Manual
  1. Manuals
  2. Brands
  3. NetComm Manuals
  4. Wireless Router
  5. 3G10WVR
  6. User manual
NetComm 3G10WVR User Manual

NetComm 3G10WVR User Manual

Liberty series hspa wifi router with voice
Hide thumbs Also See for 3G10WVR:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
YML10WVR
www.netcommlimited.com
NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice
User Guide
3G10WVR
HSPA WiFi Router with Voice-User Guide
1

Advertisement

Table of Contents
loading

Related Manuals for NetComm 3G10WVR

Summary of Contents for NetComm 3G10WVR

  • Page 1 NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice User Guide 3G10WVR YML10WVR HSPA WiFi Router with Voice-User Guide www.netcommlimited.com...
  • Page 2 Preface The purpose of this manual is to provide you with detailed information on the installation, operation and application of your HSPA WiFi Router with Voice. Important Notice and Safety Precaution • Before servicing or disassembling this equipment, always disconnect all power or telephone lines from the device. •...

  • Page 3: Table Of Contents

    NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice Table of Contents Introduction ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 5 1.1 Features ..........................................5 1.2 Package Contents........................................5 1.3 LED Indicators........................................6 1.4 Rear Panel ..........................................7 Quick Setup ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 9 2.1 Setup Procedure ........................................9 Web User Interface ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 11 3.1 Default Settings ........................................11...
  • Page 4 Introduction...

  • Page 5: Introduction

    NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice Introduction With the increasing popularity of the 3G standard worldwide, this HSPA WiFi Router with Voice provides you with triple-band coverage through expanding cellular networks throughout the world. By following the simple step-by-step instructions found on the Connection Manager USB key, you can share your connection with multiple wireless and wired devices using the 3G network.

  • Page 6: Led Indicators

    1.3 LED Indicators The front panel LED indicators are shown in this illustration and followed by detailed explanations in the table below. COLOR MODE DESCRIPTION PO WER B lu e Po w er o n O ff Po w er o ff Ph o n e B lu e Ph o ne li ne act iv e...

  • Page 7: Rear Panel

    NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice 1.4 Rear Panel The rear panel contains the ports for data and power connections. • Main 3G Antenna (removable, SMA connection) • Power jack for DC power input (12VDC / 1.5A) •...
  • Page 8 Quick Setup...

  • Page 9: Quick Setup

    NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice Quick Setup 2.1 Setup Procedure These steps explain how to quickly setup your 3G Router: 1. Attach the two 3G antennas provided to the ports marked Main and AUX on the back of the router. The antennas should be screwed in a clockwise direction.
  • Page 10 Web User Interface...

  • Page 11: Web User Interface

    NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice Web User Interface This section describes how to access the device via the web user interface using a web browser such as Microsoft Internet Explorer (version 6.0 or later). 3.1 Default Settings The following are the default settings for the device.
  • Page 12 STATIC IP Mode To configure your Router manually, your PC must have a static IP address within the Router’s subnet. The following steps show how to configure your PC IP address using subnet 192.168.1.x. The following assumes you are running Windows XP . 1. From the Network Connections window, open Local Area Connection (You may also access this screen by double-clicking the Local Area Connection icon on your taskbar). Click the Properties button. 2. Select Internet Protocol (TCP/IP) and click the Properties button. The screen should now display as below. Change the IP address to the domain of 192.168.1.x (1<x<254) with subnet mask of 255.255.255.0.
  • Page 13 NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice MAC OSX 10�4 DHCP Mode To set your Apple Mac for DHCP mode, browse to the Apple menu and select System Preferences. In the System Preferences menu, click on the Network icon and select Ethernet. Next select Using DHCP from the Configure drop down list. After clicking Apply, your Mac’s IP Address will now be automatically assigned from the Gateway. STATIC Mode If you do not wish to use automatic assignment of IP Addresses and wish to configure your Router manually, your computer must have a static IP address within the Router’s subnet. The following steps show how to configure your computer’s IP address within the subnet...

  • Page 14: Login Procedure

    3.3 Login Procedure To login to the web interface, follow the steps below: NOTE: The default settings can be found in 3.1 Default Settings. 1. Open a web browser and enter the default IP address for the Router in the Web address field. In this case http://192.168.1.1. NOTE: For local administration (i.e. LAN access), the PC running the browser must be attached to the Ethernet, and not necessarily to the device. For remote access, use the WAN IP address shown on the WUI Homepage screen and login with remote username and password.
  • Page 15 3G Settings...

  • Page 16: Settings

    3G Settings 4.1 3G Service Setup Select your 3G service settings according to predefined or custom profiles. Setup instructions are provided in the following sections for your assistance. 4�1�1 3G Settings This menu includes 3G service Setup and PIN Configuration. NOTE: Sections 8.3 and 8.4.2 also provide information about the 3G service. 4.1.2 Profile Setup Your Service Provider will provide the information required to complete the first time setup instructions below. This includes profile, username and password. Only complete those steps for which you have information and skip the others. 1.

  • Page 17: Pin Configuration

    NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice 4.2 PIN Configuration This screen allows for changes to the 3G SIM card PIN code protection settings. NOTE: If you have entered the incorrect PIN 3 times, your SIM card will be locked for your security. Please call your 3G Provider for assistance.
  • Page 18 4�2�2 PIN Code Change If you wish to change your PIN code for greater security, enable the PIN Code protection. Go to the previous section and follow the procedure listed under PIN Lock On. After locking the SIM card, select PIN Code Change and enter your Old and New PIN codes in the fields provided. Keep in mind you only have 3 attempts before your SIM card is locked. The remaining attempts’ number shows how many attempts left. Contact Your 3G Carrier if you require assistance. Afterwards, click Apply to activate the change. NOTE: If you forget to change the PIN Code without first turning on PIN lock protection, you will see this dialog box as a helpful reminder.
  • Page 19 Wireless...

  • Page 20: Wireless

    Wireless The Wireless submenu provides access to Wireless Local Area Network (LAN) configuration settings including: • Wireless network name • Channel restrictions (based on country) • Security • Access point or bridging behaviour • Station information 5.1 Setup This screen allows you to configure basic features of the wireless LAN interface. You can enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID) and restrict the channel set based on country requirements.

  • Page 21: Security

    NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice 5.2 Security This Router includes a number of security options that provides you with a secure connection to a 3G network. State-of-the art security includes: • WEP / WPA / WPA2 data encryption •...
  • Page 22 OPTION DESCRIPTION S e lec t S S ID Yo ur Se rvi c e Set Id e n t i fi e r ( SSI D ) , s ets y o ur W irel ess Net w o rk Name. Yo u can c o nn e ct mu l t i p l e d e v i ce s i nc l u d i ng Lap t op s , D esk to p P Cs and PD A s t o y o ur W ire le ss Ro u t e r.

  • Page 23: Configuration

    NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice 5.3 Configuration The following screen appears when you select Configuration. This screen allows you to control the following advanced features of the Wireless Local Area Network (WLAN) interface: • Select the channel which you wish to operate from • Force the transmission rate to a particular speed • Set the fragmentation threshold •...

  • Page 24: Mac Filter

    OPTION DESCRIPTION 54g M od e Sel ec t Au t o mo d e fo r g re at es t c o mp a t i b i li ty. Select Perf or m ance m o d e fo r the fastes t p erf o rm ance amo n g 5 4 g c ert i fie d e q u i p me nt .

  • Page 25: Station Info

    NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice 5.5 Wireless Bridge The following screen appears when selecting Wireless Bridge, and goes into a detailed explanation of how to configure wireless bridge features of the wireless LAN interface. Click Save/Apply to implement new configuration settings. FEATURE DESCRIPTION A P M od e Se le c ti n g W ire le ss B r i d g e ( W i re l e s s D i s t ri b uti o n Sy stem ) d is ab les Access Po i nt ( AP f u nc t io n a lit y wh il e se l e ct i n g Ac ce s s Po i n t enab les AP functi o nal i ty.
  • Page 26 Management...

  • Page 27: Management

    NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice Management The Management menu has the following maintenance functions and processes: • 6.1 Device Settings • 6.2 Simple Network Management Protocol (SNMP) • 6.3 Simple Network Time Protocol (SNTP) • 6.4 Access Control •...
  • Page 28 6�1�3 Restore Default The following screen appears when selecting Restore Default. By clicking on the Restore Default Settings button, you can restore your Routers default firmware settings. To restore system settings, reboot your Router. NOTE: The default settings can be found in section 3.1 Default Settings. Once you have selected the Restore Default Settings button, the following screen will appear. Close the window and wait 2 minutes before reopening your browser. If required, reconfigure your PCs IP address to match your new configuration(see section 3.2 TCP/IP Settings for details).

  • Page 29: Configure Snmp Agent On 3G10Wvr

    NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice 6.2 Configure SNMP agent on 3G10WVR The Simple Network Management Protocol (SNMP) allows a network administrator to monitor a network by retrieving settings on remote network devices. To do this, the administrator typically runs an SNMP management station program such as MIB browser on a local host to obtain information from the SNMP agent, in this case the 3G10WVR (if SNMP enabled). An SNMP ‘community’ performs...

  • Page 30: Simple Network Time Protocol (Sntp)

    6.3 Simple Network Time Protocol (SNTP) This screen allows you to configure the time settings of your Router. To automatically synchronize with Internet timeservers, tick the box as illustrated below. The following options should now appear (see screenshot below): First NTP timeserver: Select the required server. Second NTP timeserver: Select second timeserver, if required. Time zone offset: Select the local time zone. Configure these options and then click Save/Apply to activate.
  • Page 31 NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice 6�4�1 Services The Service Control List (SCL) allows you to enable or disable your Local Area Network (LAN) or Wireless Area Network (WAN) services by ticking the checkbox as illustrated below. These access services are available: FTP, HTTP, ICMP, SSH, TELNET, and TFTP. Click Save/Apply to continue.

  • Page 32: Save And Reboot

    6�4�3 Passwords The Passwords option configures your account access password for your Router. Access to the device is limited to the following three user accounts: • admin is to be used for local unrestricted access control • support is to be used for remote maintenance of the device • user is to be used to view information and update device firmware Use the fields illustrated in the screen below to change or create your password. Passwords must be 16 characters or less with no spaces. Click Save/Apply to continue. 6.5 Save and Reboot This function saves the current configuration settings and reboots your Router.
  • Page 33 Advanced Setup...

  • Page 34: Advanced Setup

    Advanced Setup This chapter explains advanced setup for your Router: 7.1 Local Area Network (LAN) This screen allows you to configure the Local Area Network (LAN) interface on your Router. HSPA WiFi Router with Voice-User Guide YML10WVR www.netcommlimited.com...
  • Page 35 NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice See the field descriptions below for more details. OPTION DESCRIPTION IP Add re s s E nt e r t he I P ad d res s f or the LA N int er face Subne t M a sk...

  • Page 36: Network Address Translation (Nat)

    7.2 Network Address Translation (NAT) 7�2�1 Port Forwarding Port Forwarding allows you to direct incoming traffic from the Internet side (identified by Protocol and External port) to the internal server with a private IP address on the LAN side. The Internal port is required only if the external port needs to be converted to a different port number used by the server on the LAN side. A maximum of 32 entries can be configured. To add a Virtual Server, click the Add button. The following screen will display. OPTION DESCRIPTION S e l e c t a S e rvi c e...
  • Page 37 NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice 7�2�2 Port Triggering Some applications require specific ports in the Router’s firewall to be open for access by remote parties. Port Triggering opens up the ‘Open Ports’ in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote party using the ‘Triggering Ports’. The Router allows the remote party from the WAN side to establish new connections back to the application on the LAN side using the ‘Open Ports’. A maximum 32 entries can be configured. To add a Trigger Port, simply click the Add button. The following will be displayed. OPTION DESCRIPTION S e le c t a n A p pl i c a ti o n U s e r s h o u l d s el e c t t h e ap p li cati on fro m the l is t.

  • Page 38: Security

    7.3 Security Your Router can be secured with IP Filtering or Parental Control functions. 7�3�1 IP Filtering The IP Filtering screen sets filter rules that limit incoming and outgoing IP traffic. Multiple filter rules can be set with at least one limiting condition. All conditions must be fulfilled when individual IP packets pass filter. Outgoing IP Filter The default setting for Outgoing traffic is ACCEPTED. Under this condition, all outgoing IP packets that match the filter rules will be BLOCKED. To add a filtering rule, click the Add button. The following screen will display. FILTER NAME THE FILTER RULE LABEL P rotoc o l T CP, T C P/ U D P, U D P o r I CM P S o urce I P ad d res s S ourc e IP a ddres s En t er s o u rce I P ad d res s S o urce Sub net M ask D e st ina t i o n IP ad dre ss...
  • Page 39 NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice To add a filtering rule, click the Add button. The following screen will display. Please refer to the Outgoing IP Filter table for field descriptions. Click Save/Apply to save and activate the filter. 7�3�2 Parental Control This Parental Control allows you to restrict access from a Local Area Network (LAN) to an outside network through the Router on selected days at certain times. Make sure to activate the Internet Time server synchronization as described in section 6.3 SNTP, so that the scheduled times match your local time.

  • Page 40: Routing

    7.4 Routing Default Gateway, Static Route and Dynamic Route settings can be found in the Routing link as illustrated below. 7�4�1 Default Gateway If the Enable Automatic Assigned Default Gateway checkbox is selected, this device will accept a default Gateway assignment. If the checkbox is not selected, a field will appear allowing you to enter the static default gateway and/or WAN interface, then click Save/Apply.

  • Page 41: Domain Name Servers (Dns)

    NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice 7�4�3 Dynamic Route To activate this option, select the Enabled radio button for Global RIP Mode. To configure an individual interface, select the desired RIP version and operation, followed by placing a check in the Enabled checkbox for that interface. Click Save/Apply to save the configuration and to start or stop dynamic routing. 7.5 Domain Name Servers (DNS) 7.5.1 DNS Server Configuration If the Enable Automatic Assigned DNS checkbox is selected, this device will accept the first received DNS assignment from the Wireless Area Network (WAN) interface during the connection process. If the checkbox is not selected, a field will appear allowing you to enter the primary and optional secondary DNS server IP addresses. Click on Save to apply.
  • Page 42 Voice...

  • Page 43: Voice

    Please refer to the documentation provided by the manufacturer for operating your Analogue Telephone. Note: That your SIM card and Mobile service needs to be provisioned for Voice Calling. Please consult with your Network Provider for verification. Note: That any telephone calls placed using the 3G10WVR may incur call usage charges determined by your Network Provider. Please consult with your Network Provider for verification. Configuring your 3G10WVR for placing Voice Calls Once your 3G10WVR has been correctly configured to access the mobile network as outlined in Section 2.1 – Quick Setup, you can make and receive telephone calls after connecting your Analogue Telephone to the socket labeled Voice on the back of your Router.
  • Page 44 Status...

  • Page 45: Status

    NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice Status The Status menu has the following submenus: • Diagnostics • System Log • 3G network • Statistics • Route • • DHCP • PING 8.1 Diagnostics The Diagnostics menu provides feedback on the connection status of the device. The individual tests are listed below.

  • Page 46: System Log

    8.2 System Log This function allows you to view system events and configure related options. Follow the steps below to enable and view the System Log. 1. Click Configure System Log to continue. 2. Select the system log options (see table below) and click Save/Apply. OPTION DESCRIPTION In di ca t es wh e t he r t h e s y s t em i s c u rrent ly reco rd i ng ev ents. You can enab le o r d i sab le e ven t l o g g in g .
  • Page 47 NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice 3. Click View System Log. The results are displayed as follows. YML10WVR HSPA WiFi Router with Voice-User Guide www.netcommlimited.com...
  • Page 48 8.3 3G Status Select this option for detailed status information on your Routers 3G connection. Consult the table on the next page for detailed field descriptions. STATUS DESCRIPTION M a nuf a c t ure r T h e m an u fa ct u rer o f t h e emb ed d ed 3 G m o d ule. M ode l T h e m o d e l na me o f t he e m b ed d ed 3 G mo d ul e FW Re v...
  • Page 49 NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice OPTION DESCRIPTION S igna l Le ve l ( R S SI ) 3 G R a d i o Si g n a l St ren g t h I nd ex Qua lity ( Ec /Io ) T h e t o t a l en e r g y p e r ch i p p er p o w er d ensi ty ( Ec/ I o ) v alue of the acti v e set’s three...

  • Page 50: Statistics

    8.4 Statistics These screens provide detailed information for: • Local Area Network (LAN) and Wireless Local Area Network (WLAN) • 3G Interfaces NOTE: These statistics page refresh every 15 seconds. 8�4�1 LAN Statistics This screen displays statistics for the Ethernet and Wireless LAN interfaces. INTERFACE SHOWS CONNECTION INTERFACES R e c e i ve d / Tran smit t e d...

  • Page 51: Route

    NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice 8.5 Route Select Route to display the paths the Router has found. DESTINATION DESTINATION NETWORK OR DESTINATION HOST G a t e w a y Next h o p IP a d d re s s...

  • Page 52: Dynamic Host Configuration Protocol (Dhcp)

    8.7 Dynamic Host Configuration Protocol (DHCP) Click DHCP to display the DHCP information. FIELD DESCRIPTION Hostname Sh o w s t he d e v ice/ hos t/ PC netw o r k nam e MAC Address Sh o w s t he Et her net MA C ad d ress o f t he d ev ice/ho s t/P C IP address Sh o w s I P a d d res s o f d ev ice/ho s t/P C Expires In...
  • Page 53 Appendices...

  • Page 54: Appendix A: Print Server

    Appendix A: Print Server For Windows Vista/7 These steps explain the procedure for enabling the Printer Server for Windows Vista or Windows 7. 1. Enable Print Server from Web User Interface. Select Enable on-board print server checkbox and enter Printer name and Make and model NOTE: The Printer name can be any text string up to 40 characters.
  • Page 55 NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice 3. Select ‘Add a network, wireless or bluetooth printer’. 4. Click on the radio-button labelled ‘Select a shared printer by name’, and type “http://192.168.1.1:631/printers/samsung” in the box below. Click ‘Next’. NOTE: The PrinterName must be the same as the printer name entered into the Printer section of 3G10WVR. 5. Next, select the driver that came with your printer. Browse through the list to select your printer driver, or click ‘Have Disk’ if you have your printer driver installation media. YML10WVR HSPA WiFi Router with Voice-User Guide www.netcommlimited.com...
  • Page 56 6. Choose whether you want this printer to be the default printer, and then click ‘Next’. 7. Click ‘Finish’. Your device is now configured and ready for use. HSPA WiFi Router with Voice-User Guide YML10WVR www.netcommlimited.com...

  • Page 57: For Mac Osx

    NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice For MAC OSX These steps explain the procedure for enabling the Printer Server on Mac OSX. Enable Print Server from Web User Interface� Select Enable on-board print server checkbox and enter Printer name, Make and model NOTE: The Printer name can be any text string up to 40 characters.
  • Page 58 Input the Address field with “192.168.1.1:631” and the Queue with “/printers/PrinterName” NOTE: The PrinterName must be the same as the printer name entered into the Printer section of 3G10WVR. From Print Using drop down list and select your corresponding printer driver. Click Add and check the printer status. HSPA WiFi Router with Voice-User Guide YML10WVR www.netcommlimited.com...

  • Page 59: Appendix B: Samba Server

    NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice Appendix B: Samba Server For Windows Vista/7 Open a web-browser (such as internet Explorer, Firefox or Safari) Type in the address \\ “NetbiosName”\ “DirectoryName” \ (eg \\ntc-cpe\ntc-cpe) Note: There are no username and password required to access the USB drive, the user will be able to read/write the folder/files in the USB drive. For MAC OSX Click the finder icon in the Dock.

  • Page 60: Legal & Regulatory Information

    The power supply that is provided with this unit is only intended for use with this product. Do not use this power supply with any other product or do not use any other power supply that is not approved for use with this product by NetComm. Failure to do so may cause damage to this product, fire or result in personal injury.

  • Page 61: Federal Communication Commission Interference Statement

    NETCOMM LIBERTY SERIES - HSPA WiFi Router with Voice Federal Communication Commission Interference Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 62 NETCOMM LIMITED Head Office PO Box 1200, Lane Cove NSW 2066 Australia W: www.netcommlimited.com Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the actual product. HSPA WiFi Router with Voice-User Guide YML10WVR www.netcommlimited.com...

Table of Contents