Table of Contents
Advertisement
Update Firmware
This page enables you to update the firmware which controls the NetComm Wireless 3G27WV-02 when updates are available.
To update the NetComm Wireless 3G27WV-02 firmware, perform the following steps:
1.
Download the firmware update file and save it to your computer.
2.
Click the Browse button and navigate to where you saved the file that you downloaded to your computer.
3.
Select this file and click the Open button.
4.
Click the Apply button and follow the on-screen prompts.
Settings Manager
This page allows you to import/export the system settings, reset your NetComm Wireless 3G27WV-02 to factory default settings,
or reboot your NetComm Wireless 3G27WV-02.
OPTION
Export Settings
Import Settings
Load Factory Defaults
Reboot Router
NetComm Wireless 3G27WV-02 User Guide
59
Figure 54 - Advanced View - Upload Firmware
Figure 55 - Advanced View - Settings Manager Settings
Select to save a copy of the current configuration of the NetComm Wireless 3G27WV-02 router. You can also encrypt the
export settings file by selecting the 'Encryption' option and then entering a password.
Select the Browse button and locate a previously saved copy of the NetComm Wireless 3G27WV-02 configuration settings file.
To load these settings onto the router press the Import button.
Use the Load Default button to reset the NetComm Wireless 3G27WV-02 to factory default settings.
Use the Reboot the NetComm Wireless 3G27WV-02 router.
Table 33 - Advanced View - Settings Manager Settings
DEFINITION
www.netcommwireless.com
Advertisement
Table of Contents
