Wps - NetComm 3G27WV-02 User Manual

WPS

WPS is the simplest way to establish a connection between wireless clients and your NetComm Wireless 3G27WV-02. This
method removes the need to manually select the encryption mode and enter in a passphrase key. You only need to press a
button on both the wireless client and the NetComm Wireless 3G27WV-02 router, and the WPS feature will complete the wireless
connection. The NetComm Wireless 3G27WV-02 supports two types of WPS:
OPTION
WPS via Push Button
WPS via PIN code
Use the drop down box to either enable or disable the WPS function.
www.netcommwireless.com
A specific button needs to be pressed on the wireless client or in the wireless client utility to start WPS mode. Then
switch the NetComm Wireless 3G27WV-02 to WPS mode either by pushing the WPS button on the wireless router,
or by clicking the 'Apply' button in the web configuration interface.
A PIN code needs to be assigned to the wireless client set to WPS mode. Then to complete the wireless connection
input the wireless client PIN into the NetComm Wireless 3G27WV-02 web interface.
Table 23 - Advanced View - Enable or Disable WPS
Figure 40 - Advanced View - WPS Settings – Disabled
DEFINITION
NetComm Wireless 3G27WV-02 User Guide
46