Error Messages - Sony SR-R1000 Operation Manual

Error Messages

When the unit ceases to operate correctly due to a
malfunction or internal system error, the alarm will sound
and an error message will appear on the display.
After an error message is displayed, eliminate the cause of
the error based on the error message and then turn the unit
back on. If the error message appears again when the unit
is turned on, contact your Sony representative.
1)
Code Indication
14xx00 PS FAN1 TROUBLE, etc.
14xxpp
260100 POWER SUPPLY UNIT TROUBLE
2701ss SLOT Mx EJECT ERROR
2801ss SLOT Mx EXIST ERROR
2901ss SLOT Mx EJECT MOTOR LOCK
960100 CALENDAR CLOCK ERROR
B3xx00 SY CPLD2 INITIAL ERROR, etc.
B3xxpp
B80300 SYS1-NW NO COMMUNICATION ERROR
B9zz00 CP-SYS1 NO COMMUNICATION ERROR, etc.
D101pp PORT x ENC DMA1 ERROR, etc.
D3xxss SLOT Mx AV WRITE ERROR1, etc.
D4xxss SLOT Mx AV READ ERROR1, etc.
D5xxss SLOT Mx INTERFACE ERROR1, etc.
D6xxss SLOT Mx UNMOUNT ERROR1, etc.
Meaning
A malfunction of cooling fan motor was detected. For
details, see the Maintenance Manual.
A power failure was detected.
Pressing the Eject button failed to eject an SRMemory card
from the indicated slot. When the slot indicator is off,
forcibly ejecting an SRMemory card will not damage
recorded data.
The SRMemory card in the indicated slot could not be
detected even though the Eject button had not been
pressed.
A malfunction of eject motor was detected at the indicated
slot. When the slot indicator is off, forcibly ejecting an
SRMemory card will not damage recorded data.
An internal calendar clock error was detected.
An error was detected at the device initialization stage. For
details, see the Maintenance Manual.
A communication error occurred between CPU (SYS1) of
the SY-422 board and CPU (NW) of the CPU-453 board.
CP CPU has detected a communication error between
CPUs (SYS1, CP, KP). For details, see the Maintenance
Manual.
A data processing error occurred on the input and output
boards.
Recording or playback may not have been performed
properly.
An error occurred while writing to the SRMemory card in
the indicated slot. For details, see the Maintenance Manual.
An error occurred while reading from the SRMemory card
in the indicated slot. For details, see the Maintenance
Manual.
Could not communicate with the SRMemory card inserted
in SLOT Mx.
This SRMemory card cannot be used in this state. Either
the unit or SRMemory card may be faulty if an error occurs
even when the SRMemory card is re-inserted or power is
turned off and on.
An error occurred when ejecting the SRMemory card from
the indicated slot.
The ejected SRMemory card may not be available. If the
error code D7xxss appears every time the SRMemory card
is inserted, the card must be salvaged.
Salvage the SRMemory card by following the instructions in
the error display screen or remove the card.
73
Troubleshooting