Sony SR-R1000 Operation Manual page 58

Button Indication
[F9] DOWN CONVERT
[F1] MODE
]F10]
EXIT
[F10] INT SG
ALT/[F1] OUT BLNK
ALT/[F3] YADD
ALT/[F5] A/B DISP
ALT/[F6] VPID SEL
58
Detailed Menu Description
Setting
Allows you to configure down converter settings.
Selects the down converter mode.
EdgeCrop: Edge crop mode.
L.Box: Letterbox mode.
Squeeze: Squeeze mode.
Returns to the original menu.
Sets the type of signal output from the internal signal generator.
Off: No signal is output from the internal signal generator.
CB100: COLOR BARS (100%)
CB75: COLOR BARS (75%)
SMPTE: SMPTE COLOR BARS
ARIB: ARIB COLOR BARS
MB1: MULTI BURST 1
MB2: MULTI BURST 2
10STEP: 10 STEPS
PBAR: PULSR & BAR
RAMP: RAMP
Black: Black
Turns on or off vertical interval blanking processing of the HD video signals output
via the SD/HD SDI OUT connectors.
Through: Does not perform blanking processing.
Blank: Performs blanking processing.
Sets whether to forcibly turn off Y add.
Auto
Off
Sets whether to display the video for the left or right when displaying 3D video
signals on the display.
Link-A
Link-B
Monitor: Performs the same operation as the ALT/[F8] (MONITOR SETTING) – [F1]
(DUAL) setting in the VIDEO menu.
Selects VPID to be multiplexed with the HD SDI output in 3D mode.
Dual: Uses as two separate sets of signals.
3D: Uses as 3D signals.
Target
Out
Out
–
In
Out
Out
I/O
Out