Sony SR-R1000 Operation Manual page 77

1) 2)
Code Indication
E400ss SLOT M-x VIRTUAL VOL CARD
Normal format card is required.
E40100 VIRTUAL VOLUME WRONG POSITION
Please exchange M3 and M4.
E40200 VIRTUAL VOLUME WRONG POSITION
Please rotate position to downward.
E40300 VIRTUAL VOLUME WRONG POSITION
Please exchange M2 and M3.
E40400 VIRTUAL VOLUME WRONG POSITION
Please rotate position to upward.
E40500 VIRTUAL VOLUME WRONG POSITION
Please exchange M2 and M4.
E41000 VIRTUAL VOLUME MOUNT FAILURE
All cards are normal format. Virtual volume
format required.
E41100 VIRTUAL VOLUME MOUNT FAILURE
M4 is other group of virtual volume.
E41200 VIRTUAL VOLUME MOUNT FAILURE
M3 is other group of virtual volume.
E41300 VIRTUAL VOLUME MOUNT FAILURE
M2 is other group of virtual volume.
E41400 VIRTUAL VOLUME MOUNT FAILURE
M4 is normal format.
E41500 VIRTUAL VOLUME MOUNT FAILURE
M3 is normal format.
E41600 VIRTUAL VOLUME MOUNT FAILURE
M2 is normal format.
E41700 VIRTUAL VOLUME MOUNT FAILURE
M2 and M3 are normal format.
E41800 VIRTUAL VOLUME MOUNT FAILURE
M2 and M4 are normal format.
E41900 VIRTUAL VOLUME MOUNT FAILURE
M3 and M4 are normal format.
E41A00 VIRTUAL VOLUME MOUNT FAILURE
Any card does not match each other.
E42000 CAN NOT MAKE A VIRTUAL VOLUME
Please make sure that all cards are, [1]512GB or
larger, [2]same type, [3]formattable (WP SW, FS
lock, REC INHI, etc.).
1) The portion in lower case letters in the above codes is one of the following
numbers.
ss is one of the following numbers which identifies the SRMemory card slot.
01: Slot 1
02: Slot 2
03: Slot 3
Meaning
An SRMemory card that is formatted as a virtual volume is
inserted.
To enable use, reformat the card as a standard card.
The SRMemory cards of a virtual volume are not inserted
properly.
Switch the cards that are inserted in slots M3 and M4.
The SRMemory cards of a virtual volume are not inserted
properly.
Move the position of each card one slot lower. Move the
card inserted in slot M4 to slot M2.
The SRMemory cards of a virtual volume are not inserted
properly.
Switch the cards that are inserted in slots M2 and M3.
The SRMemory cards of a virtual volume are not inserted
properly.
Move the position of each card one slot higher. Move the
card inserted in slot M2 to slot M4.
The SRMemory cards of a virtual volume are not inserted
properly.
Switch the cards that are inserted in slots M2 and M4.
Failed to mount the virtual volume.
All the cards are formatted as standard cards. To enable
use, reformat the cards as a virtual volume.
Failed to mount the virtual volume.
The card in slot M4 belongs to a different virtual volume.
Failed to mount the virtual volume.
The card in slot M3 belongs to a different virtual volume.
Failed to mount the virtual volume.
The card in slot M2 belongs to a different virtual volume.
Failed to mount the virtual volume.
The card in slot M4 is formatted as a standard card.
Failed to mount the virtual volume.
The card in slot M3 is formatted as a standard card.
Failed to mount the virtual volume.
The card in slot M2 is formatted as a standard card.
Failed to mount the virtual volume.
The cards in slots M2 and M3 are formatted as standard
cards.
Failed to mount the virtual volume.
The cards in slots M2 and M4 are formatted as standard
cards.
Failed to mount the virtual volume.
The cards in slots M3 and M4 are formatted as standard
cards.
Failed to mount the virtual volume.
The formatting of the cards does not match, the cards
belong to different virtual volumes, etc.
Failed to create a virtual volume.
• Use cards of the same type that are 512 GB or higher in
capacity.
• Check for settings that disable formatting (e.g., WP
switch, FS lock, REC INHIBIT).
04: Slot 4
pp is one of the following numbers which identifies the port.
81: Port A
82: Port B
83: Port C
84: Port D
77
Troubleshooting