Sony SR-R1000 Operation Manual page 56

Button Indication
ALT/[F3] TC OUT
ALT/[F4] TM DISP
ALT/[F5] TC2 SEL
ALT/[F7] CHAR
SET
[F1] POSITION
[F2] SIZE
[F3]
INFO SEL
[F4] TYPE
[F5]
SUB STAT
56
Detailed Menu Description
Setting
Sets the time code that is output from the TIME CODE OUT connector during
recording when the internal time code generator is set to a mode for regenerating
the playback time code.
Through: Outputs the time code signal input from the TIME CODE IN connector as
is.
Regene: Regenerates the time code signal input from the TIME CODE IN
connector before outputting it.
Sets whether TM1 is in 12-hour display mode or 24-hour display mode.
Note
When ±12H is set, the tens digit of the hours value is dropped.
+–12H
24H
Sets whether to use two lines for the time code display section and selects the time
code type for 2nd line when the screen is one-port display.
For input ports:
Off: No value display on the 2nd line
TCG: Value generated by the time code generator when recording
TM1: Time counter value that can be preset
TM2: Time counter value for which the beginning of the file is 0
UBG: User bit value generated by the time code generator during recording
For output ports:
Off: No value displayed on the 2nd line
LTC: LTC value read by the time code reader
VITC: VITC value read by the time code reader
TM1: Time counter value that can be preset
TM2: Time counter value for which the beginning of the file is 0
UBR: User bit value (LTC) read by the time code reader
UBV: User bit value (VITC) read by the time code reader
ORG LTC: LTC value read by the time code reader before conversion
ORG VITC: VITC value read by the time code reader before conversion
Sets the time code and other character information to superimpose on the signal
output from the SD/HD SDI MONITOR connector. (see page 32)
Allows you to set the display position of character information with the cursor
buttons.
Sets the display size of character information.
Small
Medium
Sets the character information content for when ALT/[F10] (CHAR ON) is set to On.
Time (Timedata Only): Timer counter display information only
T&V (Timedata & VITC): Timer counter display information and VITC (only output
ports can be set)
T&T1 (Timedata & TM1): Timer counter display information and TM1
T&T2 (Timedata & TM2): Timer counter display information and TM2
T&UB (Timedata & UBIT): Timer counter display information and user bits
T&UBG for input ports and T&UBR for output ports.
T&sta (Timedata & Status): Timer counter display information and operation status
T&Org (Timedata & Original): Converted time code timer counter display
information and original time code before conversion (only output ports can be
set)
T&Audio (Timedata & Audio Level): Timer counter display information and audio
level display
Sets the background of character information.
Outl (Outline): White characters with black outlines
Trnsl (Translucent): White characters on a gray screen background
w/oBG (Without BG): White characters with no background
w/BG (With BG): White characters on a black background
Selects information to be displayed in addition to characters.
Off: Not added.
Remain: Displays remaining memory. (can only be set with input ports)
File Name: Displays file name.
Target
In
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O