Sony SR-R1000 Operation Manual page 14

B Menu control section
a DISPLAY button
Used to switch between a screen displaying input/output
port information and a screen displaying the video signal
on the entire display.
b CH (channel) selection buttons
Select the channel to adjust the audio recording/playback
level or to select an audio input.
c Menu selection buttons (page 51)
Select the menu screen to display on the display.
Currently, the EDIT button cannot be used.
d MULTI CONTROL knob
Sets the audio recording/playback levels, sets menus,
selects files, etc.
e Color display (page 20)
Note on faulty pixels on the LCD panel
The LCD panel fitted to this unit is manufactured with
high precision technology, giving a functioning pixel
ratio of at least 99.99%. Thus a very small proportion of
pixels maybe "stuck", either always off (black), always
on (red, green, or blue), or flashing. In addition, over a
long period of use, because of the physical characteristics
of the liquid crystal display, such "stuck" pixels may
appear spontaneously. These problems are not a
malfunction. Note that any such problems have no effect
on recorded data.
f Function selection buttons (F1 to F10)
Select a function displayed on the menu screen.
g ALT (alternative) button
Changes the menu screen display.
14
Control Panel
h DIAG (diagnostic) button
Displays the maintenance menu when pressed together
with the SFT button.
i MEM button
Currently cannot be used.
j Memory selection buttons (M1 to M4) (page 41)
Select the SRMemory card to use.