Audio Menu - Sony SR-R1000 Operation Manual

Button Indication
ALT/ PORT
[F10]
CONFIG
[F1]
MULTIPLE
[F2]
SCAN
[F3]
SIZE
[F4] SIGNAL
[F5] 2D/3D
[F6] SDI
[F7] DEPTH
[F8] COMPRS
[F9] SET
[F10]
EXIT

AUDIO Menu

The AUDIO menu allows you to adjust audio signals.
Button Indication
[F1]
AUD IN
(ch1 to 16)
[F2] METER
[F7]
SHTL AUD
60
Detailed Menu Description
Setting
Sets the input/output signals of the input/output ports.
Note
For details on how to switch the signal format of the output ports, see "Switching the
Signal Format (HD/SD) of the Output Ports" in the Appendix.
Sets double speed input.
x1: Input speed × 1
x2: Input speed × 2
When x2 is selected, no audio will be recorded on the audio track.
Sets the scanning method.
Interlace
PsF
Progresv
Sets the resolution.
1280 : 720
1920 : 1080
2048 : 1080
Sets the sampling rate of video signals.
YPbPr
RGB
XYZ
Sets 2D/3D operation.
2D
3D
When 3D is selected for an output port that is set to SD signal output, the video
signals output from OUT1 and OUT2 will be the same as the monitor output.
Sets the format of SDI signals.
HDSDI: 1.5G SDI
3GSDI(A): 3G SDI Level A
3GSDI(B): 3G SDI Level B
Sets the bit length of input/output signals.
10bit
12bit
Sets the compression mode.
SR-Lite
SR-SQ
SR-HQ
Applies the settings.
Redisplays the previous menu.
Setting
Selects the input signal for each audio channel. (see page 48)
SDI: Selects the signal input to the HD SDI INPUT A connector.
A/E: Selects the signal input to the DIGITAL AUDIO INPUT (AES/EBU) connector.
Switches the display range of the audio level meters between FULL and FINE.
Full: The audio level meter display is from –60 dB to 0 dB, or –40 dB to +20 dB. Use
the ALT/[F10] – [F1] (SCALE) menu item to set which range (peak level: 0 dB or
+20 dB) to display.
Fine: The audio level meter display range is expanded, and the signal level is
indicated by a scale with 0.25 dB steps.
Sets whether to disable the audio signal output during shuttle playback.
PB: Turns muting off.
Muting: Turns muting on.
Target
I/O
In
I/O (HD
only)
I/O (HD
only)
I/O (HD
only)
I/O
I/O (HD
only)
I/O (HD
only)
In
I/O
–
Target
In
I/O
Out