Button
Indication
[F9]
SYS FRQ
[F10]
SET
ALT/[F1]
PB MODE
ALT/[F2]
FRZ MODE
ALT/[F3]
FRZ CTRL
ALT/[F4]
ALPHA LV
ALT/[F6]
NAMING
ALT/[F7]
VIRTUAL
ALT/[F9]
ERR DLG
64
Detailed Menu Description
Setting
Sets the system frequency.
23.98
24
25
29.97
Applies the setting configured with the [F9] (SYS FRQ) button.
Sets the playback mode.
Field: Field playback
Frame: Frame playback
Specifies the freeze mode and freeze timing for during manual freeze (freeze
control with the control panel, REMOTE 1 to 4 (9-pin) connectors, and GPIO (25-
pin) connector) or auto freeze.
Field1: Freezes the 1st (odd) field.
Field2: Freezes the 2nd (even) field.
Frame: Freezes in frame mode.
Sets the freeze operation performed by button operation.
Moment: Performs the freeze operation only while the button is held down.
Latch: Pressing the button performs the freeze operation and pressing the button
again cancels the freeze operation.
Sets the output level of ALPHA CHANNEL of LINK B output for during 4:4:4 DUAL
LINK output.
White: Outputs the white level.
Black: Outputs the black level.
Specifies the file naming rule used during recording.
Seq: Generates file names using sequential numbers.
Time: Generates file names using dates and times.
Specifies whether to use virtual volumes. This determines the operation mode of
slots M2, M3, and M4.
Off: Allows you to use standard SRMemory cards in all slots.
On: Allows you to use the SRMemory cards inserted in slots M2, M3, and M4 as a
single large storage location (i.e., a virtual volume).
For details, see "Virtual Volumes" in Chapter 3.
Displays error dialogs on the control panel.
Off
On
Target
Unit
–
Unit
Unit
Unit
Unit
Unit
Unit
Unit