Sony SR-R1000 Operation Manual page 76

1)
Code Indication
2201ss SLOT Mx WRITE PROTECTED
(Mx WP SW ON)
2202ss SLOT Mx FS LOCKED
(Mx FS LOCKED)
2203ss SLOT Mx WRITE PROTECTED AND FS
LOCKED (Mx WP AND FS)
2901pp PORT x VPID MISMATCH BITDEPTH
(P-x VPID B-DP)
2A01pp PORT x VPID MISMATCH COLORSPACE
(P-x VPID C-SP)
2B01pp PORT x VPID MISMATCH LINK INFORMATION
(P-x VPID LINK)
2C01pp PORT x X2 ORDER MISMATCH
(P-x X2 ORDER)
2D01pp PORT x INVALID SDI DATA
(P-x INVLD SDI)
2E01pp PORT x LEVEL A/B MISMATCH
(P-x LVL-A/B)
470100 RTC BATTERY LOW LEVEL
(RTC BATT LOW)
7301pp PORT x NO REF INFORMATION
(P-x FLD INFO)
7401pp PORT x ASYNCHRONOUS VIDEO INPUT
(P-x ASYNC VIN)
E101ss SLOT Mx FULL, NOT RECORDABLE
(Mx FULL)
E102ss SLOT Mx COND3 BAD, NOT RECORDABLE
(Mx COND3 BAD)
E103ss SLOT Mx FUNCTION LIMIT
(Mx FUNC LIMIT)
E105ss SLOT Mx MAXIMUM FILES, NOT
RECORDABLE
(Mx MAX FILES)
E106ss SLOT Mx FILE SYSTYEM STUFFED, NOT
RECORDABLE
(Mx FS STUFFED)
E107ss SLOT Mx ALTERNATE UMID GENERATED
(Mx ALT LIMID)
E202pp PORT x FULL, STOP RECORDING
(P-x FULL STOP)
76
Troubleshooting
2)
Meaning
The write-protect switch on the SRMemory card is set to on
and prevents recording to the card in the indicated slot.
The SRMemory card in the indicated slot is locked and
cannot be recorded.
The SRMemory card in the indicated slot is write-protected
or locked and cannot be recorded.
The bit length in VPID of the input signal from the indicated
port does not match the system bit length.
The color space in VPID of the input signal from the
indicated port does not match the system color space.
Link data in VPID of the input signal from the specified
connector does not match the data of the connected port.
The order described in the VPID of the specified port's
input signal and the system order do not match.
Note
This warning only occurs when x2 mode is selected by Port
Config.
The SDI input signal data for the displayed port is invalid.
Level-A/B of the 3G input signal for the displayed port does
not match.
Note
This warning only occurs when SDI is set to 3G SDI (A) or
3G SDI (B) for Port Config.
The lithium battery on the SY-350 board is low on power.
Since there is no 30 frames/sec reference data for the 720/
59.94P HD SDI signal input to the indicated port, the signal
cannot be properly locked.
The HD SDI input signal at the indicated port is out of
phase by ±5H or more from the reference signal.
Because SRMemory card in the indicated slot has no
space to use for recording, the record operation/command
for the SRMemory card was terminated.
Delete the files on the SRMemory card.
Recording is not possible because the space to replace the
bad memory cell is consumed on the SRMemory card in
the indicated slot. The recording operation/command was
terminated.
Replace it with a recordable SRMemory card.
Recording and playback operations for the SRMemory card
inserted in the displayed slot were canceled due to
restrictions on recording and playback.
Cancelled SRMemory card recording operations and
commands because the number of files in the SRMemory
card has reached its upper limit.
Delete files in the SRMemory card.
Cancelled SRMemory card recording operations and
commands because the SRMemory card in the displayed
slot has reached its file system management limit.
Format the SRMemory card to enable recording.
Replaced the UMID of newly-generated files to avoid
duplication of UMID in the SRMemory card in the displayed
slot.
The SRMemory card in the indicated port is full and
recording was terminated.