Sony SR-R1000 Operation Manual page 15

C Port control section
a Cursor buttons
Move the cursor (shown in reverse video) on the display.
Also used to change settings values.
b PORT SELECT buttons/indicators (page 41)
Buttons: Select the input/output port to use. A button
lights up when selected.
Top indicators: Light up red for input ports, and green for
output ports.
Bottom indicators: Light up red for ports being used for
recording, and green for ports being used for
playback.
D Numeric buttons
a Numeric buttons and +/– buttons
Press to input an edit point or other numerical value at the
position selected by the cursor buttons. Press buttons 0 to
5 while holding down the SFT button to input hexadecimal
A to F for user bits. Also use the +/– buttons to increase or
decrease numerical values.
b SFT (shift) button
Press buttons 0 to 5 while holding down the SFT button to
input hexadecimal A to F for user bits. Use also in
combination with other buttons to perform other
operations.
c RCL (recall) button
Press to recall the previous setting, etc.
d CLR (clear) button
Press to clear input data.
e SET button
Press to finalize input data.
E Editing control section
Currently cannot be used.
F Recording/playback control section
a PREV button
Press to display the image of the first frame in the current
file. Press again to jump to the first frame in the previous
file.
Press this button and the SFT button simultaneously to
display the image of the first frame in the file at the top of
the file list.
b NEXT button
Press to display the image of the first frame in the next file.
Press this button and the SFT button simultaneously to
display the image of the first frame in the file at the end of
the file list.
c EXECUTE button
Press to open the file selected in the file list.
Press the EXECUTE and STOP buttons simultaneously to
close a file.
d STOP button
Press to stop playback or recording.
e PLAY button
Press to start playback. Press the PLAY button while
holding down the REC button to start recording.
If you press the NEXT button while holding down the
PLAY button, the last frame of the current playback file is
displayed. If you press the NEXT button while holding
down the PLAY button during chasing playback, playback
will jump and resume from the playable position that is
closest to the recording position at that moment.
f REC button
Press the PLAY button while holding down the REC
button to start recording.
15
Control Panel