Detailed Menu Description; Home Menu - Sony SR-R1000 Operation Manual

Detailed Menu Description

HOME Menu

The HOME menu allows you to set the basic operation
modes for recording and playback.
Settings in the Setting column are the values that appear in
the menu display section of the screen. Underlined values
are the factory default settings.
Button Indication
[F2]
FREEZE
[F3] REF SEL
[F4]
EXT REF
[F5]
MON(L)
[F6]
MON(R)
[F8] 9PIN
[F9] 25 PIN
ALT/[F1] SYNC
ALT/[F3] CONTINU
Setting
Outputs a still picture (the picture that was playing just before the button was
pressed). Select the field or frame that specifies the still picture with the ALT/[F2]
(FRZ MODE) buttons in the SETUP menu. (see page 45)
Selects the signal to be the reference for operation of the unit.
Ext: Forces the reference signal to be external.
Input A, Input B, Input C, and Input D: Uses the signal from the HD SDI INPUT
connector of ports A to D as the reference signal.
Sets whether the reference signal is an HD signal or SD signal when using an
external reference signal.
HD
SD
Selects the audio channel output from the MONITOR OUTPUT L connector. (see
page 48)
After pressing the button, use the channel selection buttons to select channels 1 to
16.
Selects the audio channel output from the MONITOR OUTPUT R connector. (see
page 48)
After pressing the button, use the channel selection buttons to select channels 1 to
16.
Turn this On to enable the unit to be controlled from a device connected to a
REMOTE connector.
On
Off
When set to On, the unit can be controlled from devices connected to the GPIO
connector.
On
Off
Selects whether to synchronize input ports and output ports.
Off: The ports are not synchronized.
Port: Basic operations are synchronized between all output ports and between all
input ports.
P&File: Basic operations are synchronized between two output ports. In
configurations that consist of two inputs and two outputs, the basic operations
are also synchronized between the two input ports.
Files recorded from input ports synchronized in this mode can be opened
(played back) in pairs.
For details on sync operations, see "Synchronizing the Input and Output Ports" in
Chapter 3.
Selects the operation mode for continuous playback. (see page 45)
Off: Files are not played continuously.
File Rpt: Files are played on repeat.
List: The file list is played continuously.
List Rpt: The file list is played on repeat.
The Target column displays the following data.
Unit: Settings for the overall unit
In: Settings for the input ports
Out: Settings for the output ports
I/O: Settings for the input/output ports
Target
Out
Unit
Unit
I/O
I/O
I/O
Unit, I/O
Unit, I/O
Unit
53
Detailed Menu Description