FLIR F-Series Installation Manual page 2

© FLIR Commercial Systems, Inc., 2012. All rights reserved worldwide. No parts of this manual, in whole or in part,
may be copied, photocopied, translated, or transmitted to any electronic medium or machine readable form without the
prior written permission of FLIR Commercial Systems, Inc.
Names and marks appearing on the products herein are either registered trademarks or trademarks of FLIR
Commercial Systems, Inc. and/or its subsidiaries. All other trademarks, trade names, or company names referenced
herein are used for identification only and are the property of their respective owners.
This product is protected by patents, design patents, patents pending, or design patents pending.
The F-Series thermal imaging system is controlled by US export laws. There are special versions of this system that are
approved for international distribution and travel. Please contact FLIR Systems if you have any questions.
FLIR Commercial Systems, Inc.
70 Castilian Drive
Goleta, CA 93117
Phone: +1.888.747.FLIR (+1.888.747.3547)
Document Number: 427-0030-00-12, Version 150
Document History
Revision Date
100 February 2010
110 July 2010
120 August 2010
130 September 2010
140 November 2010
150 January 2012
This equipment must be disposed of as electronic waste.
Contact your nearest FLIR Commercial Vision Systems, Inc. representative for
instructions on how to return the product to FLIR for proper disposal.
Federal Communications Commission Regulatory Information
Modification of this device without the express authorization of FLIR Commercial Systems, Inc., may void the user's
authority under the FCC Rules to operate this device.
Note 1: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense. Shielded cables
must be used to connect this device to other devices.
Note 2: If ferrites are supplied with this equipment, the equipment was tested for compliance with the FCC limits for a
Class A digital device using power cables with the ferrites installed. When connecting one or two power cables to the
equipment, the supplied ferrites must be used with this equipment.
-ii
Initial Release
Added FLIR Sensors Manager information
Added IP66 and operating temperature to specifications
Changed the power consumption specifications, added inrush current
specification,
Changed camera model specifications. Added export statement.
Increased operating temperature range specification to -50
Added FCC and EMC radio emissions notices, additional software
functionality, and export control changed to EAR 1.
January 2012
F-Series Installation Manual
Comment
o
C through 70
427-0030-00-12, version 150
o
C.