FLIR F-Series Installation Manual page 16

2—Verify Camera Operation
Step 6 Confirm that video is streamed to the monitor and it is possible to control the camera
using the zoom controls and so on. For example, click on the zoom button (magnifying
glass with +), and the video will zoom to 2X. Once operation of the camera has been
confirmed, the camera can be configured to an IP address that matches the
installation network.
Step 7 Return to the Web Configurator screen
shown at the right and select Login as
Basic User or enter basic as the User and
click Login.
No password is required.
The Web Configurator will display the Help
screen listing information on the camera's
software and hardware configuration.
The menu on the left allows you to select
various configuration web pages in order to
set the camera configuration parameters.
See "F-Series Camera Configuration" on
page 3-1.
Once you have verified the basic operation of the camera and successfully streamed video, you
will want to install the camera in its proper location. Confirm the cables are properly attached
and the DIP switches are set as desired. Reassemble the rear cover after confirming the
ground wire is connected properly, and tighten the cable gland nuts to ensure a good seal all
around.
2-4 January 2012
F-Series Installation Manual
427-0030-00-12, version 150