Web Configuration Overview; Web Configurator Login - FLIR F-Series Installation Manual

3—F-Series Camera Configuration
3.2

Web Configuration Overview

This section provides a brief overview of how to use a web browser to connect to the camera
and make configuration changes using the Web Configuration tool. First familiarize yourself with
the information in this section, and then refer to the IP Communications Quick Guide for
information about how to configure the IP interface, since the web browser communicates
using the IP interface.
3.2.1

Web Configurator Login

Once you are able to use a web browser to connect to the camera, the login screen will appear;
select Login as Basic User, or type "basic" as the User and click on Login (there is no password
for the Basic user).
Note
Prior to making changes to the configuration, it may be wise to bench test the camera using
the factory configured IP address. See "Verify IP Communications" on page 2-1..
3-2 January 2012
F-Series Installation Manual
427-0030-00-12, version 150