Auerswald COMfortel 1200 Setup Manual page 47

2.
Insert the other ISDN cable plug into the ISDN socket connected to the
PBX.
3.
Select the desired language:
4.
Press the OK key.
5.
Select the desired PBX:
6.
Press the OK key.
7.
Use the keypad to enter the internal telephone number previously config-
ured in the PBX.
8.
Confirm the entry:
Note: If the date and time are not yet configured in the PBX, only the name
and version of the telephone are displayed.
Further Steps
Configure the telephone according to your requirements. Carry out the con-
figuration either using the menu on the telephone display (see the Opera-
tion Guide) or using the configuration software COMfortel Set (recom-
mended; see
If necessary, change the display profile to improve the contrast of the dis-
play (see the Operation Guide).
If necessary, carry out a firmware update in order to extend the telephone
with the newly available functions (see
features can be found in the internet (see www.auerswald.de/service).
COMfortel 1200/1400 - Firmware Version 1.4 - COMfortel Set 3.6.0 - Setup V01 04/2014
The telephone starts up. In the meantime, the Auerswald company icon
is shown on the display.
The menu for language selection is displayed.
COMfortel 1200: Press the arrow keys
COMfortel 1400: Tap on
COMfortel 1200: Press the arrow keys
COMfortel 1400: Tap on
COMfortel 1200: Press the OK key.
COMfortel 1400: Tap on OK or press the OK key.
The date and time as well as the name of the internal subscriber are
displayed. The telephone is now ready for use.
page 51).
Commissioning
or
or or press the arrow keys
or
or or press the arrow keys
page 53). Information about new
.
or .
.
or .
47