Konfigurationssoftware COMfortel Set installieren.............. 25 Telefon und Anrufbeantworter (nur COMfortel 1400) über einen PC einrichten ....25 Anhang..........................27 Firmwareversion/Seriennummer abfragen................27 Sofortiges Firmware-Update über Update-Server durchführen .......... 27 COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Page 5
Configuring the Telephone and Answering Machine (only COMfortel 1400) using a PC ... 49 Appendix..........................51 Querying the Firmware Version/Serial Number ..............51 Performing a Firmware Update via the Update Server ............51 COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
Gehäuse und am Gerät selbst können zu einem lebensgefährlichen elek- trischen Schlag führen. Schließen Sie die Anschlusskabel des Geräts nur an die dafür bestimm- ten Steckdosen an. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Page 8
Touch-Pen. Verwenden Sie auf keinen Fall Kugelschreiber, Bleistifte oder andere spitze Gegenstände auf dem Display. Drücken Sie nicht mit Gewalt auf den Display. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
COMmander Business/19" (ab Firmwareversion 4.2E) Hinweis: Der Anschluss an eine TK-Anlage eines anderen Herstellers oder an den externen S -Anschluss eines Netzbetreibers ist nicht vorgesehen. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
0 bis 40 °C Sicherheit Lieferumfang Telefon COMfortel 1200/1400 Hörer mit Spiralkabel (RJ-10/RJ-10) zum Anschluss an das Telefon ISDN-Kabel (RJ-45/RJ-45) zum Anschluss an die TK-Anlage COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Rufannahme und Aufzeichnung durch den lokalen Anrufbeantworter ist nicht möglich, während ein weiteres Telefon am selben Port im Gespräch ist. Um den vollen Funktionsumfang zu gewährleisten, sollten Sie nur 1 Telefon pro Port vorsehen. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Unfreie Sendungen können wir leider nicht annehmen. Energieverbrauch Ihr Auerswald-Telefon verbraucht automatisch nur die unbedingt notwendige Energie. Beachten Sie trotzdem die folgenden Energiesparhinweise: Verwenden sie den Stromsparmodus so häufig wie möglich. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Arev Font 2006 Tavmjong Bah. Alle Rechte vorbehalten. Alle anderen genannten Marken sind Eigentum der jeweiligen Hersteller. Dieses Produkt enthält Software, die in Teilen auf der Arbeit der Independent JPEG Group basiert. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Abb. 2 auf Seite 16). Hinweis: Zur Änderung der Höhe können die Füße in drei verschiedenen Stellungen aufgesteckt werden. Schieben Sie die Gehäusefüße bis zum Anschlag nach innen. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Handwerkszeug: Kleiner Schraubendreher (ca. 4 mm breit) Stecken Sie den Schraubendreher in den Schlitz an der unteren Kante der Hörermulde (siehe Abb. 3). Abb. 3: Schraubendreher ansetzen COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Buchse auf der Unterseite des Telefons (siehe Abb. 5 auf Seite 18). Führen Sie das Kabel über den zugehörigen Kabelkanal nach außen. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
COMfortel 1400: Stecken Sie den Anschlussstecker des Headsets in die gekennzeichnete Buchse auf der Unterseite (siehe Abb. 6). Führen Sie das Kabel über den zugehörigen Kabelkanal nach außen. Abb. 6: Headset anschließen COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Schützen Sie das Gerät vor Schmutz, übermäßigem Staub, Konden- sation, aggressiven Flüssigkeiten und Dämpfen. Beachten Sie die in den technischen Daten angegebenen Werte für Umgebungstemperatur und Luftfeuchtigkeit. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Drehen Sie die zwei Schrauben so weit ein, dass der Schraubenkopf ca. 5 mm Abstand von der Wand hat. Hängen Sie das Gerät auf die Schrauben und ziehen Sie es an der Wand nach unten bis zum Anschlag. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Stecken Sie den anderen Stecker des ISDN-Kabels in eine mit der TK-An- lage verbundene ISDN-Steckdose. Das Telefon fährt hoch. Währenddessen wird im Display das Auerswald-Firmenlogo eingeblendet. Das Menü zur Auswahl der Sprache erscheint. Wählen Sie die gewünschte Sprache: COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Funktionen zu erweitern (siehe Seite 27). Informationen über Neuerungen finden Sie im Internet (siehe www.auerswald.de/service). Anrufbeantworter in Betrieb nehmen (nur COMfortel 1400) Voraussetzungen – Eine handelsübliche Micro-SD-/SDHC-Karte mit folgenden Merkmalen: COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Page 23
Geben Sie den Freischaltcode über die Wähltastatur ein. Tippen Sie zum Abschluss der Eingabe auf OK. Der Anrufbeantworter ist jetzt freigeschaltet. Weitere Schritte – Erstellen Sie eine oder mehrere individuelle Ansagen (siehe Seite 24). COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Zuweisung sowohl über das displaygeführte Menü (unter Anrufbeantwor- ter > AB Funktionen > Rufannahme > ...) als auch über die Konfigurati- onssoftware COMfortel Set durchführen (empfohlen; siehe Seite 25). COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Ihnen verwendete Schnittstelle aus (z. B. IP-Netzwerk bei Verbindung des PCs mit der TK-Anlage über das lokale Netzwerk). Öffnen Sie die Konfiguration des Telefons. Klicken Sie dazu nacheinander auf Öffnen > Telefon. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Page 26
Datei > Speichern > Telefon. Hinweis: Sind mehrere Systemtelefone vorhanden, müssen Sie im Dialog Verbindungswege das betreffende Telefon auswählen. Geben Sie im Dialog PIN-Eingabe die erforderliche PIN ein. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
– Verbindung der TK-Anlage mit Breitband-Internetanschluss – In der TK-Anlage eingerichtete Adresse des Update-Servers – In der TK-Anlage eingestellter DNS-Server, ggf. auch HTTP-Proxy-Server Drücken Sie die Menütaste. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Page 28
Beides finden Sie im Internet (siehe www.auerswald.de/service). – Für die Nutzung neuer Leistungsmerkmale nach einem Firmware-Update des Telefons ist oft auch eine Aktualisierung der Firmware der TK-Anlage notwendig (siehe Anleitung der TK-Anlage). COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Spalt an der Oberkante der transparenten Abdeckung und hebeln Sie die Abdeckung nach oben ab. Legen Sie das Beschriftungsschild ein. Setzen Sie die Abdeckung mit der matten Oberfläche nach oben wieder ein. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Verwenden Sie keine scharfen oder lösemittelhaltigen Reinigungsmit- tel. Wichtig: Feuchtigkeit kann Fehlfunktionen des Displays des COMfortel 1400 verursachen. Reinigen Sie das Display nur mit einem weichen, trockenen Tuch. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Inbetriebnahme V02 05/2015...
Only connect the device's connection cable with the sockets that are designed for that purpose. Have damaged connection lines replaced immediately. Use only original accessories and original replacement parts. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
If you are still uncertain about how to use the product properly after reading the chapter below, please contact your specialised dealer. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
Possible Number of System Telephones on Auerswald PBXs Important: The power consumption of the terminals on the internal S ports on Auerswald PBXs may not exceed the listed values in the fol- lowing table. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
Environmental Notice Disposal If you are retiring your Auerswald device, please ensure you dispose of it prop- erly. It must not be disposed of in normal household waste. In the interest of environmental protection, please ensure proper disposal of packaging materials as well.
All other trademarks mentioned are the property of the corresponding manufac- turer. This product contains software which is based in part on the work of the Inde- pendent JPEG Group. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
Assemble the feet of the casing in the required position (see Fig. 10 on page 40). Note: The feet can be assembled in three different positions. Push the feet inward up to the stop. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
Tools: Small screw driver (approx. 4 mm wide) Insert the screw driver into the slot at the lower edge of the receiver recess (see Fig. 11). Fig. 11: Inserting a screw driver COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
(see Fig. 13 on page 42). Guide the cable to the outside using the corresponding cable channel. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
– A wired headset corresponding to the technical data listed on page 35. Insert the headset connector: COMfortel 1200: Pull the connector of the receiver out of the socket at the back marked with and insert the connector of the headset into this socket instead (see Fig.
Place the telephone on a clean, flat surface. Caution: Some paints or plastics used on furniture may react chemically with the plastic feet on the device and cause them to soften. Plastic chem- COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
Screw in the two screws far enough so that the screw head is about 5 mm away from the wall. Mount the telephone on the screws, then slide the telephone on the wall downwards until the screws hit the stopper. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
Insert the other ISDN cable plug into the ISDN socket connected to the PBX. The telephone starts up. In the meantime, the Auerswald company icon is shown on the display. The menu for language selection is displayed. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
(see www.auerswald.de/service). Commissioning the Answering Machine (only COMfortel 1400) Requirements – Standard microSD/SDHC card with the following features: With a capacity of up to 8 GB COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
Page 47
Create one or more separate announcements (see page 48). – Configure the answering machine according to your requirements. Carry out the configuration either using the menu on the telephone display (see COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
(in answer.machine > functions > TAM announcem. > ...) or via the configuration software COMfortel Set (recommended; see page 49). COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
Open the telephone configuration. For this, successively click Open > Tele- phone. Note: If there are several telephones, select the corresponding telephone in the Connection options dialogue. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
Page 50
File > Save > Telephone. Note: If there are several telephones, select the corresponding telephone in the Connection options dialogue. Enter the required PIN in the PIN entry dialogue. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
Note: If there are system telephones of different designs, the firmware has to be distributed for each design. Requirements – New firmware version on the distributing telephone Press the menu key. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
Only clean the casing of the device with a slightly moist cloth or an anti- static cloth. Caution: Cleaning agents may damage the surface. Do not use caustic or solvent-containing cleaning agents. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
Page 54
Appendix Important: Humidity may cause malfunctions of the display of the COM- fortel 1400. Clean the display only with a soft, dry cloth. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
SED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
BSD License. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY expressed or implied, including the implied warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. A copy of this license is available at http://www.open- COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...
Page 58
THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED WARRANTY. IN PARTICULAR, THE AUTHOR MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE. COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015...