Connecting A Headset - Auerswald COMfortel 1200 Setup Manual

3.
Insert the other RJ-10 connector of the spiral cord into the jack on the re-
ceiver.

Connecting a Headset

Requirements
– A wired headset corresponding to the technical data listed on
1.
Insert the headset connector:
2.
Guide the cable to the outside using the corresponding cable channel.
Fig. 14: Connecting a headset
COMfortel 1200/1400 - Firmware Version 1.4 - COMfortel Set 3.6.0 - Setup V01 04/2014
Fig. 13: Connecting the receiver
COMfortel 1200: Pull the connector of the receiver out of the socket at
the back marked with
socket instead (see
COMfortel 1400: Insert the connector of the headset into the jack
labelled with on the lower side of the telephone (see
and insert the connector of the headset into this
Fig. 13).
Preparation
page 37.
Fig. 14).
43