Appendix; Querying The Firmware Version/Serial Number; Performing A Firmware Update Via The Update Server - Auerswald COMfortel 1200 Setup Manual

Once you have put your telephone into operation and configured it, check this section on
operation and configuration for additional useful information.

Querying the Firmware Version/Serial Number

1.
Press the menu key.
2.
Select the information menu:
3.
Confirm your selection:
4.
Scroll to the desired information:

Performing a Firmware Update via the Update Server

Important: Only available for operation on the PBXs COMpact 3000 ana-
logue/ISDN/VoIP, COMpact 5010 VoIP, COMpact 5020 VoIP and COM-
mander 6000/R/RX. On the other PBXs a manual firmware update can be
performed instead.
Requirements
– PBX connected to broadband Internet access
– Address of the update server configured in the PBX
– DNS server and, if necessary, HTTP proxy server configured in the PBX
1.
Press the menu key.
2.
Open the following menu:
COMfortel 1200/1400 - Firmware Version 1.4 - COMfortel Set 3.6.0 - Setup V01 04/2014

Appendix

COMfortel 1200: Press the arrow keys
COMfortel 1400: Tap on
COMfortel 1200: Press the OK key.
COMfortel 1400: Tap on OK or press the OK key.
The information selected last will be displayed.
COMfortel 1200: Press the arrow keys
COMfortel 1400: Tap on
COMfortel 1200: settings > synchronisation > firmware update
COMfortel 1400: settings > synchronisation > firmware update > FW
update server
The message firmware update execute? appears.
or
or or press the arrow keys
or
or or press the arrow keys
Appendix
.
or
.
or
.
.
53