Status Icons / Led's; Keypad Tones; Table 7: Icon & Led Indicator Meanings; Table 8: Keypad Tones - Bosch Solution 144 Quick Start Manual

Solution 144 Quick Start Guide
St atu s Ico ns / LED 's
The following table lists the function of each of the ICON
symbols and LED indicators on the keypad display.
Status
Icon
The keypad can be programmed to display
area icons (1 to 8) that allow users to easily
identify which areas have been turned on or off
without the need to toggle between areas (See
MENU 6-1-4).
On
Off
Flashing
Fast
On
Flashing
Flashing
Off
On
On
Off
Flashing
On
Off
On
Off
On
Off
On
Off
Flash
On
Off
On
Red
LED
Flashing
On
Green
LED
Flashing
Red &
Flashing
Green
LED
Table 7: ICON & LED Indicator Meanings
16
Meaning
The area is turned All On or Part
On
The area is turned Off
The area has an alarm
System power is normal
System power is missing
A fire alarm is active
No fire alarm
Fire alarm in memory (Turn the
area All On and Off to Clear).
The existing service or trouble
condition has been acknowl-
edged.
No service or trouble conditions
exist
A service or trouble condition is
present that has not been ac-
knowledged.
The area is turned Part On.
The area is not turned Part On.
The area is turned off.
The area is turned All On or Part
On
The area is turned All On or Part
On
The area is turned Off
All messages have been read.
Message queue is empty
An unread message is in the
queue.
Area is ready to turn on
(All On / Part On)
Not ready, Zone Open
All On
Alarm
Area is off.
Area not ready to turn on
Installer programming mode is
active.
Keyp ad Tone s
All keypads emit several distinct tones and display text
to alert you to system events. The volume of the keypad
tones can be adjusted in MENU 6-1-0.
Type
Fire When a fire zone sounds an alarm, the
Alarm keypad will sound 3 seconds on and 2
Tone seconds off (repeat).
When a burglary zone activates while your
Burglary
system is turned on, your keypad emits a
Alarm
continuous siren tone. It sounds for the
Tone
time set by your security company.
When a system component is not
Trouble functioning properly, your keypad sounds
Tone
4 fast short beeps followed by a 5 second
pause (repeat).
Pressing any key on the keypad sounds one
Key Press
short beep, indicating that the key press is
Tone
accepted.
When you enter the premises through
a zone programmed for entry delay, the
Entry keypad sound a Hi/Low tone to remind you
Delay to turn off the area. If the area is not turned
Tone off before the entry delay expires, an alarm
condition will sound and a report may be
sent to your alarm company.
After you turn an area All On, the keypad
will sound 1 short beep every second.
Exit
During the last 10 seconds fast short beeps
Delay
will be heard. If you don't exit before the
Tone
delay time expires and an exit delay door is
faulted, an alarm occurs.
If you enter an incorrect value when
Error
programming, the keypad will sound a 2
Tone
second tone.
The keypad will sound a Lo/Hi tone to
Menu
indicate you have entered MENU Mode and
Mode a Hi/Low tone to indicate you have exited
MENU mode.
The keypad sounds fast short beeps to alert
Chime
you when a zone programmed for chime is
Tone
faulted or unsealled.

Table 8: Keypad Tones

Bosch Security Systems 10/12 BLCC600R
Meaning