Table of Contents
Advertisement
Abo ut Th e Key p ad
The keypad has 20 keys that allow you to input instructions
and navigate the programming menu's as required. Some
keys have a secondary function which is activated by
pressing and holding them down for two seconds. Each
key is described below.
Key
The numeric keys allow you to enter
to
your user PIN when required.
Use the [MENU] and the numeric keys
to enter commands. The [MENU] key
is also used to go back one level when
navigating through menus or to exit a
programming location without saving
changes.
The [ON] key allows you to turn an area
or output on. To turn all areas on at the
same time when the system has been
partitioned, press and hold the [ON]
key for two seconds.
The [PART] key allows you to turn an
area Part On. This key can also be used
to bypass a zone or multiple zones
when you press and hold for two
seconds after you enter your PIN.
The [OFF] key allows you to turn an
area or output off. To turn all areas off
at the same time when the system had
been partitioned, press and hold the
[OFF] key for two seconds after you
enter your PIN.
The [OK] key allows you to save any
changes and exit the command.
The [MAIL] key allows you to read
stored mail. This key can also be used
to initiate a dialler test when you press
and hold for two seconds.
The [] key allows you to move the
cursor left when programming text or
telephone numbers.
The [] key allows you to move the
cursor right when programming text
or telephone numbers.
The [] key allows you to navigate
through menus or to toggle characters
when
numbers.
Bosch Security Systems 10/12 BLCC600R
Description
programming
telephone
Key
The [] key allows you to navigate
through menus or to toggle characters
when
numbers.
display current trouble conditions
when the area that the keypad is
displaying is disarmed.
Press and hold the [] and [] keys
together for 2 seconds will initiate a
+
panic emergency alarm to be triggered.
If programmed, the sirens will sound
for 2 sec
and the monitoring station will be
notified.
Press and hold the [] and [] keys
together for 2 seconds will initiate a
+
fire emergency alarm to be triggered. If
programmed, the sirens will sound and
for 2 sec
the monitoring station will be notified.
Press and hold the [] and [] keys
together for 2 seconds will initate
+
a medical emergency alarm to be
triggered. If programmed, the sirens
for 2 sec
will sound and the monitoring station
will be notified.
Table 6: Keypad Key Functions
Figure 22: Keypad Emergency Alarm Trigger's
Solution 144 Quick Start Guide
Description
programming
telephone
Pressing The [] key will
15
Advertisement
Table of Contents
