Status Icons / Led's; Keypad Tones; Table 7: Icon & Led Indicator Meanings; Table 8: Keypad Tones - Bosch Solution 6000-IP CC615GWF Quick Start Manual

Solution 6000-IP Quick Start Guide
St atu s Ico ns / LED 's
The following table lists the function of each of the ICON
symbols and LED indicators on the keypad display.
Icon Status
The keypad can be programmed to display area
icons (1 to 8) that allow users to easily identify
which areas have been turned on or off without
the need to toggle between areas (See MENU
6-1-5).
On The area is turned All On or Part On
Off The area is turned Off
Flashing
The area has an alarm
Fast
On System power is normal
Flashing System power is missing
Flashing A fire alarm is active
Off No fire alarm
Fire alarm in memory (Turn the
On
area All On and Off to Clear).
Flashing A burglary alarm is active
Off No burglary alarm
Burglary alarm in memory (Turn the
On
area All On and Off to clear).
The existing service or trouble
On condition has been acknowl-
edged.
No service or trouble conditions
Off
exist
A service or trouble condition is
Flashing present that has not been ac-
knowledged.
On The area is turned Part On.
Off The area is not turned Part On.
On The area is turned off.
The area is turned All On or Part
Off
On
The area is turned All On or Part
On
On
Off The area is turned Off
On
All messages have been read.
Off Message queue is empty
An unread message is in the
Flash
queue.
Area is ready to turn on
On
(All On / Part On)
Off Not ready, Zone Open
On All On
Red
LED
Flashing Alarm
On Area is off.
Green
LED
Flashing Area not ready to turn on
16
Meaning
Red &
Installer programming mode is
Flashing
Green
active.
LED
The WiFi enabled keypad or mod-
ule has successfully connected to
your local WiFi network.
The WiFi enabled keypad or mod-
ule is not connected to your local
WiFi network.
Table 7: ICON & LED Indicator Meanings
Ke yp ad Ton es
All keypads emit several distinct tones and display text
to alert you to system events. The volume of the keypad
tones can be adjusted in MENU 6-0-7.
Type
Fire
When a fire zone sounds an alarm, the keypad
Alarm will sound 3 seconds on and 2 seconds off
Tone
(repeat).
When a burglary zone activates while your
Burglary
system is turned on, your keypad emits a
Alarm
continuous siren tone. It sounds for the time
Tone
set by your security company.
When a system component is not functioning
Trouble
properly, your keypad sounds 4 fast short
Tone
beeps followed by a 5 second pause (repeat).
Pressing any key on the keypad sounds one
Key Press
short beep, indicating that the key press is
Tone
accepted.
When you enter the premises through a zone
programmed for entry delay, the keypad
Entry sound a Hi/Low tone to remind you to turn off
Delay the area. If the area is not turned off before
Tone the entry delay expires, an alarm condition
will sound and a report may be sent to your
alarm company.
After you turn an area All On, the keypad will
sound 1 short beep every second. During
Exit
the last 10 seconds fast short beeps will be
Delay
heard. If you don't exit before the delay time
Tone
expires and an exit delay door is faulted, an
alarm occurs.
If you enter an incorrect value when
Error
programming, the keypad will sound a 2
Tone
second tone.
The keypad will sound a Lo/Hi tone to indicate
Menu
you have entered MENU Mode and a Hi/Low
Mode
tone to indicate you have exited MENU mode.
The keypad sounds fast short beeps to alert
Chime
you when a zone programmed for chime is
Tone
faulted or unsealled.

Table 8: Keypad Tones

Meaning
Bosch Security Systems 10/22 BLCC615R