Features; Overview - Bosch Solution 144 Quick Start Manual

Solution 144 Quick Start Guide
Fe at ure s
Listed below are the main features of the Solution 144
Control Panel.
♦
Individual Box Tamper Circuit Monitoring
♦
Report Via Email (Internet)
♦
Telephone Line Busy Tone Detect
♦
RAS Intelli-Connect® CLI Caller Line Identification
♦
Daylight Savings
♦
Senior Watch
♦
GSM/GPRS/Ethernet Reporting Options
♦
System Maintenance Interval Reminder
♦
System Weekly Test Reminder
♦
Area Inactivity Interval
♦
Up to 16 Access Doors
♦
Temporary PIN
♦
Dual Reporting
♦
Dual Redundant Reporting
♦
Alarm Report Abort/Cancel Options
♦
8 Programmable Holiday Calendars
♦
16 Programmable TimeZones
♦
8 On-board Zones (Single EOL) / 16 On-Board Zones
(Dual EOL)
♦
Expandable To 144 Zones)
♦
Fire Alarm Verification
♦
255 PIN Users
♦
4 Supervised High Power Digital Outputs
♦
1 Relay 2 Amp Form (C) Contact (Expandable to 32)
♦
Supervised Siren Driver
♦
Partitionable To 8 Areas
♦
Dialler Reports SIA, Contact ID, SMS and Email
Formats
♦
Supervised LAN Keypads (Maximum 16 Keypads)
♦
Keyswitch Input
♦
1000 History Event Memory
♦
EMI / Lightning Transient Protection
♦
Fully Menu Text Programmable
♦
Programmable Via Solution Link Software (Remote/
Direct)
♦ Telephone Line Fail Monitor
♦
TimeZone Executed Functions
♦
60+ Output Event Types
♦
Exit Restart
♦
Expansion Module Supervision
♦
DTMF Tone Decoder Built In
♦
Remote Arming
♦
Fingetprint Reader Options
4
O ve r vi ew
Zones
The Solution 144 control panel provides up to 144 separate
zones of protection. Zone programming determines the
panel's response to open/short and tamper conditions on
the zone loop.
Areas
The control panel supports up to 8 separate areas. You can
assign all zones to a single area, or you can assign each
zone to a combination of different areas.
You can arm and disarm the control panel by area,
alternatively, you can arm and disarm several areas at the
same time.
Dialler
The control panel has a built-in dialler to send reports
to the receiving party (ie. Security company monitoring
station, mobile phone etc).
Keypads
You can connect a maximum of 16 fully supervised keypads
to the control panel. The available current affects the total
number of keypads that you can connect without the need
to provide additional power supplies.
History Log
The control panel can store up to 1000 history events from
all 8 areas. All events are stored in the log, even if they are
programmed not to report via the on-board dialler.
You can view the control panel's history log via keypad,
or by connection of a personal computer (direct/remote)
using the SolutionLink upload/download software.
Programming
You can program the Solution 144 either by a keypad or
using a personal computer using the Solution Link upload/
download software.
Bosch Security Systems 10/12 BLCC600R