Bosch Solution 144 Quick Start Manual page 51

System > TimeZones >
TimeZone Options
1 Invert Period Logic
2 Master Edit Allowed
3 Reserved
4 Reserved
5 Reserved
6 Reserved
7 Reserved
8 Reserved
Use the [] and [] keys to scroll the list of options. Select
the option required, then press [ON] or [OFF] to enable or
disable. A [] will display to indicate option set. Press [OK]
to save when finished.
System > Holidays >
Holiday Name
H o l i d a y
Use the [] and [] keys to scroll cursor left and right.
Use the [0] – [9] keys or the [] and [] keys to scroll
characters, then press [OK] to save. Press [OFF] to clear
text from the current cursor position.
System > Holidays >
Start Stop Dates
Start 12am
01
DD
Use the [] and [] keys to move to the field then [] and
[] to change. Press [OK] to save or [MENU] to exit without
saving.
Press [OFF] to disable the holiday.
i
Note
Bosch Security Systems 10/12 BLCC600R
MENU 7-5-3
MENU 7-6-0
1 N a m e
MENU 7-6-1
Stop 12am
Jan 01
MM DD
System > System Options >
General Options
N 1 Display LAN Fail
N 2 Report LAN Fail
N 3 Alarm On LAN Fail
N 4 Cannot Change Own PIN
N 5 Reserved
Y 6 Monitor Default PINs
N 7 PIN Always Required
Y 8 Display Menu Numbers
(*** System Wide Parameter ***)
Use the [] and [] keys to scroll the list of options. Select
the option required, then press [ON] or [OFF] to enable or
disable. A [] will display to indicate option set. Press [OK]
to save when finished.
System > System Options >
Area Options
1 Area 1 Common
2 First Open Last Close
3 Reset Siren All Users
4 Power Up As Down
5 Fault ACK All Areas
6 Delay Trouble Beeps
7 Power Up Disarmed
8 Reserved
Jan
MM
(*** System Wide Parameter ***)
Use the [] and [] keys to scroll the list of options. Select
the option required, then press [ON] or [OFF] to enable or
disable. A [] will display to indicate option set. Press [OK]
to save when finished.
System > System Options >
Keypad Idle Screen
(*** System Wide Parameter ***)
00 - No Idle Screen
01 - Date And Time
Use [] and [] keys or enter 0 - 3, then press [OK] to
program the keypad idle screen - Single option only.
System > System Options >
Keypad Hi/Lo Temp
(*** System Wide Parameter ***)
Use [] and [] Keys To Program The High / Low Keypad
Monitor Temperature. Max = 50 / Min = 0.
Solution 144 Quick Start Guide
MENU 7-7-0
MENU 7-7-1
MENU 7-7-2
02 - Time
03 - Custom Screen
MENU 7-7-3
0 0 0 0 0 0
˚C
Hi TEMP Lo TEMP
Y
Y
N
N
N
Y
N
Y
N
N
Y
Y
Y
Y
N
N
0 0
˚C
51