Table of Contents
Advertisement
Comms > Reporting
System Route
00 - Log Events Only
01 - Dest 1 + Log
02 - Dest 2 + Log
03 - Dest 1 & 2 + Log
04 - Dest 2 If 1 Fails
Use [] and [] keys or enter 0 - 4 + [OK]. Enter single
option only. (*** System Wide Parameter ***).
Comms > Reporting
Emergency Route
00 - Log Events Only
01 - Dest 1 + Log
02 - Dest 2 + Log
03 - Dest 1 & 2 + Log
04 - Dest 2 If 1 Fails
Use [] and [] keys or enter 0 - 4 + [OK]. Enter single
option only. (*** System Wide Parameter ***).
Comms > Reporting >
Swinger Dialler
(*** System Wide Parameter ***)
Enter 0 – 15 + [OK] to program number of times the dialler
can report before lockout. 0 = Unlimited.
Comms > Reporting >
Burg Report Delay
(*** System Wide Parameter ***)
Enter 0 – 255 seconds + [OK] to program the delay time in
seconds before reports are sent. 0 = No Delay.
Comms > Reporting >
Fire Report Delay
(*** System Wide Parameter ***)
Enter 0 – 255 seconds + [OK] to program the delay time in
seconds before reports are sent. 0 = No Delay.
Comms > MyAlarm >
IP Address
Factory Set
Comms > MyAlarm >
IP Port
Factory Set
Bosch Security Systems 10/12 BLCC600R
Comms > MyAlarm >
MyAlarm Options
MENU 5-4-3
0 1
1 Reserved
2 Reserved
3 Reserved
4 Reserved
5 Reserved
6 Reserved
7 Reserved
8 Reserved
MENU 5-4-4
Use the [] and [] keys to scroll the list of options. Select
the option required, then press [ON] or [OFF] to enable or
0 1
disable. A [] will display to indicate option set. Press [OK]
to save when finished.
i
Note
Comms > MyAlarm >
Gateway Numbers
MENU 5-4-5
SMS Primary
0 6
1
1 8 3 2 1 3 4 5 0 6 4 1
SMS Secondary
1
1 8 3 2 1 3 4 5 1 8 2 5
MENU 5-4-6
Email
0 0 0
1
Seconds
1 8 3 2 1 3 4 5 2 5 0 5
MyAlarm
1
1 8 3 2 1 3 4 5 2 5 0 5
Use the [] and [] keys to scroll cursor left and right. Use
MENU 5-4-7
the [0] – [9] keys or the [] and [] keys to scroll characters,
then press [OK] to save. Press [OFF] to clear text from the
0 0 0
current cursor position.
Seconds
Comms > MyAlarm >
Email Address
Email
MENU 5-5-0
Address
Use the [] and [] keys to scroll cursor left and right.
Use the [0] – [9] keys or the [] and [] keys to scroll
characters, then press [OK] to save. Press [OFF] to clear
text from the current cursor position. To program the '@'
MENU 5-5-1
symbol, press the [] key 32 times.
Solution 144 Quick Start Guide
Menu's 5-5-0 and 5-5-1 should be left at the factory
default settings unless you are advised otherwise
by the manufacturer.
Digits
Digits
Digits
Digits
Characters
1
MENU 5-5-2
N
N
N
N
N
N
N
N
MENU 5-5-7
32
32
32
32
MENU 5-5-8
80
41
Advertisement
Table of Contents
