Table of Contents
Advertisement
Solution 144
Quick Start Guide
Comms > Comms Test >
Test Report Period
(*** System Wide Parameter ***)
00 - No Test Report
01 - Every Day
02 - Every Week
03 - Every Month
04 - Every 2 Days
05 - Every 3 Days
06 - Every 4 Days
07 - Every 5 Days
MENU 5-9-2 programs the interval between automatic
test reports. Use [] and [] keys or enter [0] to [15] + [OK]
to program.
Comms > Comms Test >
Test Report Options
1 Test If No Other Rpt
2 Test On Siren Reset
3 Reserved
4 Reserved
5 Reserved
6 Reserved
7 Reserved
8 Reserved
Use the [] and [] keys to scroll the list of options. Select
the option required, then press [ON] or [OFF] to enable or
disable. A [] will display to indicate option set. Press [OK]
to save when finished.
Comms > Reporting
Test Route
00 - Log Events Only
01 - Dest 1 + Log
02 - Dest 2 + Log
03 - Dest 1 & 2 + Log
04 - Dest 2 If 1 Fails
Use [] and [] keys or enter 0 - 4 + [OK]. Enter single
option only. (*** System Wide Parameter ***).
Comms > Comms Test >
Dial Number Test
Use the option to test the system dialer to your mobile
or other phone. Enter the digits to dial and press OK. The
system will call the number entered. This function will
stop after 30 seconds, or by pressing [OK]. Enter [0] – [9]
for telephone digits. Use [] and [] to toggle special
Characters * # and , (Pause).
44
MENU 5-9-2
0 1
08 - Reserved
09 - Reserved
10 - Reserved
11 - Reserved
12 - Reserved
13 - Reserved
14 - Every Hour
15 - Every 12 Hours
MENU 5-9-3
MENU 5-9-4
0 1
MENU 5-9-5
D ev ice Progra mmin g
Devices > Commands >
Device Status
LAN Secure
LAN Scan
LAN Watch
Keypad Volume
Keypad Contrast
Keypad Backlight
Devices > Keypads & Readers >
Name
K e y p a d
Use the [] and [] keys to scroll cursor left and right.
Use the [0] – [9] keys or the [] and [] keys to scroll
characters, then press [OK] to save. Press [OFF] to clear
N
text from the current cursor position.
Y
Devices > Keypads & Readers >
N
Area Options
N
1 All On Arming Allowed
N
2 Part On Arming Allowed
N
3 Disarming Allowed
N
4 Single Button Control
N
5 All User Areas
6 Zero Exit Time
7 PIN To Change Area
8 Home Area Only
Use the [] and [] keys to scroll the list of options. Select
the option required, then press [ON] or [OFF] to enable
or disable. A [] will display to indicate option set. Press
[OK] to save when finished.
Devices > Keypads & Readers >
Home Area
00 - No Area
01 - Security System
02 - Area 2 Name
03 - Area 3 Name
04 - Area 4 Name
Use [] and [] keys or enter 0 - 8 then press [OK] to
program. This is the area that will be displayed on the
keypad by default.
MENU 6-0-0
MENU 6-0-1
MENU 6-0-2
MENU 6-0-3
MENU 6-0-7
MENU 6-0-8
MENU 6-0-9
MENU 6-1-0
1
N a m e
MENU 6-1-2
MENU 6-1-3
05 - Area 5 Name
06 - Area 6 Name
07 - Area 7 Name
08 - Area 8 Name
Bosch Security Systems 10/12 BLCC600R
Y
Y
Y
Y
N
N
N
N
0 1
Advertisement
Table of Contents
